Skip to content
-
-
-
-
4,04 € (sis. KM)
- 50 VS R V-ring seal, VS design, global standard, interchangeable with VR2 design V-ring seals (V-rings) are all-rubber, axial shaft seals. They offer an easy-to-install solution for rotating shaft applications, including use as a secondary seal in highly contaminated environments. The VS design includes a standard low cross section with a tapered back side face and a wide seal body,…
- Lisa korvi
-
-
-
-
5,80 € (sis. KM)
- 140 VA R V-ring seal, VA design, global standard, interchangeable with VR1 design V-ring seals (V-rings) are all-rubber, axial shaft seals. They offer an easy-to-install solution for rotating shaft applications, including use as a secondary seal in highly contaminated environments. The VA design includes a standard cross section with a straight back side face. Being the most common type of…
- Lisa korvi
-
-
-
-
-
-
2,55 € (sis. KM)
- O-rõngas O-rõngad säilitavad tihendi kontaktjõu tänu nende radiaalsele või aksiaalsele deformatsioonile tihendi korpuses kahe komponendi vahel. Memi Varustaja OÜ tarnib laias suuruses ja erinevatest materjalidest O-rõngaid, mis muudavad need sobivaks mitmesuguste töötingimuste ja rakenduste jaoks. Neid on lihtne paigaldada ja need võimaldavad lihtsa ja kulutõhusa tihendikorpuse disaini.
- Lisa korvi
-
-
-
1626,98 € (sis. KM)
- 24038 CC/C3W33 Spherical roller bearing with relubrication features Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts. Also available on request…
- Lisa korvi
-
-
-
157,12 € (sis. KM)
- 22312 E Spherical roller bearing with relubrication features Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts. Also available on request…
- Lisa korvi
-
-
-
-
6,01 € (sis. KM)
- PHG AX24EP Cogged raw-edge classical V-belt Belts provide a very efficient and cost-effective method for transmitting power from prime movers to driven machines. These raw-edge classical V-belts have cogs on their inside to enable the belts to flex around smaller pulleys. Without fabric covering their flanks, raw-edge belts can provide a higher friction and a minimized loss of power through…
- Lisa korvi