Skip to content
-
-
-
82,65 € (sis. KM)
- UCF 309 Square flanged ball bearing unit with set screw locking, cast iron housing, JIS These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is…
- Lisa korvi
-
-
-
11,98 € (sis. KM)
- PHG XPA950EP Cogged raw-edge wedge belt Belts provide a very efficient and cost-effective method for transmitting power from prime movers to driven machines. These raw-edge wedge belts have cogs on their inside that enable the belts to flex around smaller pulleys. Without fabric covering their flanks, raw-edge belts can provide a higher friction and a minimized loss of power through…
- Lisa korvi
-
-
-
-
-
25,42 € (sis. KM)
- PHE CJEL42A92 Curved jaw coupling yellow element with A92 shore hardness and standard torque These curved jaw coupling elements with standard torque capacity in yellow are compatible with all hub materials. They provide effective vibration damping and offer medium flexibility, making them suitable for a wide range of applications. Flexibility for misalignment Compensates for radial and angular deviations with its…
- Lisa korvi
-
-
-
-
1,15 € (sis. KM)
- PCMF 081007.5 E PTFE composite flanged bushing SKF PTFE composite flanged bushings are suitable for oscillating, rotating and linear movements, and can accommodate radial loads as well as axial loads in one direction. Despite their thin-walled design, they can accommodate heavy loads. They also provide good heat dissipation, therefore enabling relatively high sliding velocities. Maintenance-free operation Cost-effective with long service…
- Lisa korvi
-
-
-
231,33 € (sis. KM)
- 6317/C4 Deep groove ball bearing Single row deep groove ball bearings are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types. Also available on request with special sized…
- Lisa korvi
-
-
-
23,66 € (sis. KM)
- PHG BX58EP Cogged raw-edge classical V-belt Belts provide a very efficient and cost-effective method for transmitting power from prime movers to driven machines. These raw-edge classical V-belts have cogs on their inside to enable the belts to flex around smaller pulleys. Without fabric covering their flanks, raw-edge belts can provide a higher friction and a minimized loss of power through…
- Lisa korvi
-
-
-
30,03 € (sis. KM)
- XPA1732 Cogged raw-edge wedge belt Belts provide a very efficient and cost-effective method for transmitting power from prime movers to driven machines. These raw-edge wedge belts have cogs on their inside that enable the belts to flex around smaller pulleys. Without fabric covering their flanks, raw-edge belts can provide a higher friction and a minimized loss of power through slippage.…
- Lisa korvi
-
-
-
18,40 € (sis. KM)
- B41 Wrapped classical V-belt Belts provide a very efficient and cost-effective method for transmitting power from prime movers to driven machines. Classical V-belts have pre-tensioned polyester cords that provide low stretch during operation and a fibre-loaded rubber cushion that gives good transverse rigidity. Being fully wrapped in a heavy duty industrial fabric, the belts have a high resistance against abrasion.…
- Lisa korvi
-
-
-
18,40 € (sis. KM)
- B42.5 Wrapped classical V-belt Belts provide a very efficient and cost-effective method for transmitting power from prime movers to driven machines. Classical V-belts have pre-tensioned polyester cords that provide low stretch during operation and a fibre-loaded rubber cushion that gives good transverse rigidity. Being fully wrapped in a heavy duty industrial fabric, the belts have a high resistance against abrasion.…
- Lisa korvi
