Tekkis küsimus toodete leidmise või allahindluste kohta? Vaata ostujuhist
-
STOPPERRÕNGAS 78MM AVALE DIN472
- 1,59 € (sis. KM)
- Lisa korvi
-
REGULEERSEIB 30x42x1,5 DIN 988
- 2,34 € (sis. KM)
- Lisa korvi
-
REGULEERSEIB 30x42x2 DIN 988
- 3,74 € (sis. KM)
- Lisa korvi
-
MB23 LUKUSTUSSEIB SKF
- 10,48 € (sis. KM)
- MB 23 Lock washer for metric lock nuts MB and MBL lock washers are locking devices, used to secure KM, KML and HM .. T lock nuts onto a shaft or adapter sleeve and prevent unintentional loosening. MB .. A is a stronger version of the MB washer. The lock washers engage a keyway in the shaft or adapter sleeve…
- Lisa korvi
-
KMT6 LUKUSTUSMUTTER LUKUSTUSTIHVTIDEGA M30x1.5 SKF
- 65,53 € (sis. KM)
- KMT 6 Precision lock nut with locking pins KMT precision lock nuts are intended for applications where high precision, simple assembly and reliable locking are required. The three equally-spaced locking pins enable these lock nuts to be accurately positioned at right angles to the shaft. However, they can also be adjusted to compensate for slight angular deviations of adjacent components.…
- Lisa korvi
-
FRB5/130 DISTANTSRÕNGAS SKF
- 5,58 € (sis. KM)
- FRB 5/130 Locating (stabilizing) ring A bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating…
- Lisa korvi
-
TERASKUUL D-40MM
- 17,05 € (sis. KM)
- Lisa korvi
-
H2324 KOONUSPUKS 110MM VÕLLILE SKF
- 209,57 € (sis. KM)
- H 2324 Adapter sleeve with KM lock nut and MB lock washer, metric dimensions Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain shafts or stepped shafts. They are slit and are supplied complete with a KM lock nut and a MB lock…
- Lisa korvi
-
H2312 KOONUSPUKS 55MM VÕLLILE SKF
- 91,35 € (sis. KM)
- H 2312 Adapter sleeve with KM lock nut and MB lock washer, metric dimensions Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain shafts or stepped shafts. They are slit and are supplied complete with a KM lock nut and a MB lock…
- Lisa korvi
-
LIIST 12 X 8 L-32MM DIN 6885 A
- 1,19 € (sis. KM)
- Lisa korvi
-
DISTANTSRÕNGAS FRB 5/215 SKF
- 16,37 € (sis. KM)
- FRB 5/215 Locating (stabilizing) ring A bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating…
- Lisa korvi
-
REGULEERSEIB 22 X 32 X 1,0 DIN988
- 0,93 € (sis. KM)
- Lisa korvi
