Tekkis küsimus toodete leidmise või allahindluste kohta? Vaata ostujuhist
-
LIIST 14 X 9 L-30MM DIN6885A
- 2,01 € (sis. KM)
- Lisa korvi
-
STOPPERRÕNGAS 78MM AVALE DIN472
- 1,59 € (sis. KM)
- Lisa korvi
-
REGULEERSEIB 30x42x1,5 DIN 988
- 2,34 € (sis. KM)
- Lisa korvi
-
REGULEERSEIB 30x42x2 DIN 988
- 3,74 € (sis. KM)
- Lisa korvi
-
MB23 LUKUSTUSSEIB SKF
- 10,48 € (sis. KM)
- MB 23 Lock washer for metric lock nuts MB and MBL lock washers are locking devices, used to secure KM, KML and HM .. T lock nuts onto a shaft or adapter sleeve and prevent unintentional loosening. MB .. A is a stronger version of the MB washer. The lock washers engage a keyway in the shaft or adapter sleeve…
- Lisa korvi
-
KMT6 LUKUSTUSMUTTER LUKUSTUSTIHVTIDEGA M30x1.5 SKF
- 65,53 € (sis. KM)
- KMT 6 Precision lock nut with locking pins KMT precision lock nuts are intended for applications where high precision, simple assembly and reliable locking are required. The three equally-spaced locking pins enable these lock nuts to be accurately positioned at right angles to the shaft. However, they can also be adjusted to compensate for slight angular deviations of adjacent components.…
- Lisa korvi
-
FRB5/130 DISTANTSRÕNGAS SKF
- 5,58 € (sis. KM)
- FRB 5/130 Locating (stabilizing) ring A bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating…
- Lisa korvi
-
TERASKUUL D-40MM
- 17,05 € (sis. KM)
- Lisa korvi
-
H2324 KOONUSPUKS 110MM VÕLLILE SKF
- 209,57 € (sis. KM)
- H 2324 Adapter sleeve with KM lock nut and MB lock washer, metric dimensions Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain shafts or stepped shafts. They are slit and are supplied complete with a KM lock nut and a MB lock…
- Lisa korvi
-
H2312 KOONUSPUKS 55MM VÕLLILE SKF
- 91,35 € (sis. KM)
- H 2312 Adapter sleeve with KM lock nut and MB lock washer, metric dimensions Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain shafts or stepped shafts. They are slit and are supplied complete with a KM lock nut and a MB lock…
- Lisa korvi
-
LIIST 12 X 8 L-32MM DIN 6885 A
- 1,19 € (sis. KM)
- Lisa korvi
-
DISTANTSRÕNGAS FRB 5/215 SKF
- 16,37 € (sis. KM)
- FRB 5/215 Locating (stabilizing) ring A bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating…
- Lisa korvi
-
REGULEERSEIB 22 X 32 X 1,0 DIN988
- 0,93 € (sis. KM)
- Lisa korvi
-
REGULEERSEIB 35 X 45 X 1,5 DIN988
- 1,90 € (sis. KM)
- Lisa korvi
-
PINGUTUSRULLIK TS 30-28 OD-30MM
- 21,02 € (sis. KM)
- Lisa korvi
-
LUKUSTUSMUTTER KM24 M120X2 SKF
- 56,30 € (sis. KM)
- KM 24 Lock nut with metric thread, for locking by lock washer KM and KML lock nuts are used to locate bearings onto a shaft. They have metric threads and four equally spaced slots located around their circumference to accommodate a spanner. They should be locked by a lock washer to prevent unintentional loosening. KM and KML lock nuts can…
- Lisa korvi
-
KOONUSPUKS 60MM VÕLLILE SEADEKRUVIGA H313 E SKF
- 83,89 € (sis. KM)
- H 313 E Adapter sleeve with KMFE lock nut, metric dimensions Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain shafts or stepped shafts. They are slit and are supplied complete with a KMFE lock nut. Easy to install Complete with lock nut
- Lisa korvi
-
LUKUSTUSMUTTER TOLLMÕÕDUS AN16 SKF
- 63,88 € (sis. KM)
- AN 16 Lock nut with inch thread, for locking by lock washer AN lock nuts are used to locate bearings onto a shaft. They have inch threads and four, equally spaced slots around their circumference to accommodate a spanner. They should be locked by a lock washer to prevent unintentional loosening. AN lock nuts can be reused, provided they are…
- Lisa korvi
-
REGULEERSEIB 40 X 50 X 2,50mm DIN 988
- 4,65 € (sis. KM)
- Lisa korvi
-
KOONUSPUKS 125MM VÕLLILE H3028 SKF
- 212,73 € (sis. KM)
- H 3028 Adapter sleeve with KM lock nut and MB lock washer, metric dimensions Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain shafts or stepped shafts. They are slit and are supplied complete with a KM lock nut and a MB lock…
- Lisa korvi
-
NILOS RING 6212.JV
- 8,74 € (sis. KM)
- Lisa korvi
-
Clamp collar double-split steel C45, bore 25mm with bolts DIN 912 12.9
- 11,85 € (sis. KM)
- Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel:…
- Lisa korvi
-
DISTANTSRÕNGAS FRB 14/160 SKF
- 11,59 € (sis. KM)
- FRB 14/160 Locating (stabilizing) ring A bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating…
- Lisa korvi
-
TERASKUUL D-2MM G100 SNR
- 0,15 € (sis. KM)
- Lisa korvi
