Alates 60€ ostudele on transport tasuta!
Kõikidele registreeritud kasutajatele rakendub allahindlus 12%, ostudel üle 122€ on lisaallahindlus kõigile 5% (kokku 17%).
Toodete otsimine/leidmine:
- Laagrid mõõdu järgi: _ X _ X _ nt
17 X 40 X 12. Kuvatakse kõik selles mõõdus olevad laagrid. - Tootekoodi järgi: 6204, nt
6204-2RS. Kuvatakse tooted, mis algavad selle koodiga ja sisalduvad toote nimetuses. - Kaelustihend/o-rõngad: _X_X_X, nt
10X22X7kaelustihenditel täpne tulemus; 10 X 22 X 7 kuvatakse tooted, kus on vähemalt üks mõõtudest; 30 X 3/7, 94 X 1,78 o-rõngastel. - Kategooriad: nt Laagrid > filtreeri “Filtrid” alt kuullaagrid. Kuvatakse kõik kuullaagrid.
- Rihmad: kuvatakse tootekoodi ja/või mõõdu alusel, nt
17 X 875; SPA950
-
PUKKLAAGER d-17MM UCF 203 CRAFT BEARINGS
- 12,77 € (sis. KM)
- Lisa korvi
-
TERASKUUL D-2MM G100 SNR
- 0,15 € (sis. KM)
- Lisa korvi
-
PUKKLAAGER d-30MM USFD 206 SNR
- 44,90 € (sis. KM)
- Lisa korvi
-
ÜHEREALINE KUULLAAGER METALLIKATETEGA 6011-2Z 55X90X18 SKF
- 31,52 € (sis. KM)
- 6011-2Z Deep groove ball bearing with seals or shields Single row deep groove ball bearings with seals or shields are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing…
- Lisa korvi
-
PUKKLAAGER d-50MM MÄÄRDENIPPEL M10x1 UCF210 NM10x1 SNR
- 100,37 € (sis. KM)
- Lisa korvi
-
RIHMARATAS SPA 90 X 4 X 1615 OPTIBELT
- 20,40 € (sis. KM)
- 4SPA90TB Wedge belt pulley, taper bushed Wedge belt pulleys are designed to be used with wedge belts. They are available with one or several grooves, enabling multiple belts to run in parallel. The pulleys are easily mounted on the shafts using the appropriate taper bushings. Manufactured according to international standards Phosphate-coated for corrosion resistance Statically balanced (dynamic balancing available on…
- Lisa korvi
-
TERASKUUL D-8,5MM G20 SKF
- 0,43 € (sis. KM)
- Lisa korvi
-
KIILRIHM HAMMASTATUD XPB 1750Lw EPDM STRONGBELT MAXIMUM PLURIS
- 41,45 € (sis. KM)
- XPB1750 Cogged raw-edge wedge belt Belts provide a very efficient and cost-effective method for transmitting power from prime movers to driven machines. These raw-edge wedge belts have cogs on their inside that enable the belts to flex around smaller pulleys. Without fabric covering their flanks, raw-edge belts can provide a higher friction and a minimized loss of power through slippage.…
- Lisa korvi
-
SIDURI VAHEELEMENT PU ROTEX75 RED 98Sh
- 70,61 € (sis. KM)
- Lisa korvi
-
KIILRIHM SILE B87 17X2210Li STRONGBELT CLASSIS
- 36,84 € (sis. KM)
- B87 Wrapped classical V-belt Belts provide a very efficient and cost-effective method for transmitting power from prime movers to driven machines. Classical V-belts have pre-tensioned polyester cords that provide low stretch during operation and a fibre-loaded rubber cushion that gives good transverse rigidity. Being fully wrapped in a heavy duty industrial fabric, the belts have a high resistance against abrasion.…
- Lisa korvi
-
LINEAARJUHIK HGH 25CA Z0C HIWIN
- 89,16 € (sis. KM)
- Lisa korvi
-
HAMMASRIHM PU AT10 1000 L-16MM Z- 100 MEGAPOWER2
- 46,24 € (sis. KM)
- Lisa korvi
-
O-RÕNGAS 140,0 X 3,0 NBR70
- 3,29 € (sis. KM)
- O-rõngas O-rõngad säilitavad tihendi kontaktjõu tänu nende radiaalsele või aksiaalsele deformatsioonile tihendi korpuses kahe komponendi vahel. Memi Varustaja OÜ tarnib laias suuruses ja erinevatest materjalidest O-rõngaid, mis muudavad need sobivaks mitmesuguste töötingimuste ja rakenduste jaoks. Neid on lihtne paigaldada ja need võimaldavad lihtsa ja kulutõhusa tihendikorpuse disaini.
- Lisa korvi
-
KIILRIHM HAMMASTATUD XPB 2650Lw OPTIBELT XE-POWER PRO
- 75,33 € (sis. KM)
- Compact: Performance on the smallest pulleys The new tooth form, developed through FEM modulation and practical tests, continues to enable very small minimum pulley diameters for internal pulleys. In addition, the optibelt SUPER XE-POWER PRO M=S is now also suitable for external pulleys. This is the prerequisite for designing more compact drive units. Totally versatile: Anything but conventional The optibelt…
- Lisa korvi
-
KIILRIHM SILE SPA 1700Lw GATES SUPER HC
- 37,16 € (sis. KM)
- SPA1700 Wrapped wedge belt Belts provide a very efficient and cost-effective method for transmitting power from prime movers to driven machines. Wedge belts have pre-tensioned polyester cords that provide low stretch during operation and a fibre-loaded rubber cushion that provides good transverse rigidity. Being fully wrapped in a heavy duty industrial fabric, the belts have a high resistance against abrasion.…
- Lisa korvi
-
O-RÕNGAS 179,30 X 5,70 EPDM 70
- 7,01 € (sis. KM)
- O-rõngas O-rõngad säilitavad tihendi kontaktjõu tänu nende radiaalsele või aksiaalsele deformatsioonile tihendi korpuses kahe komponendi vahel. Memi Varustaja OÜ tarnib laias suuruses ja erinevatest materjalidest O-rõngaid, mis muudavad need sobivaks mitmesuguste töötingimuste ja rakenduste jaoks. Neid on lihtne paigaldada ja need võimaldavad lihtsa ja kulutõhusa tihendikorpuse disaini.
- Lisa korvi
-
O-RÕNGAS 144,30 X 5,70 EPDM 70
- 5,58 € (sis. KM)
- O-rõngas O-rõngad säilitavad tihendi kontaktjõu tänu nende radiaalsele või aksiaalsele deformatsioonile tihendi korpuses kahe komponendi vahel. Memi Varustaja OÜ tarnib laias suuruses ja erinevatest materjalidest O-rõngaid, mis muudavad need sobivaks mitmesuguste töötingimuste ja rakenduste jaoks. Neid on lihtne paigaldada ja need võimaldavad lihtsa ja kulutõhusa tihendikorpuse disaini.
- Lisa korvi
-
O-RÕNGAS 54,0 X 3,0 FKM70 VITON BLACK
- 3,11 € (sis. KM)
- O-rõngas O-rõngad säilitavad tihendi kontaktjõu tänu nende radiaalsele või aksiaalsele deformatsioonile tihendi korpuses kahe komponendi vahel. Memi Varustaja OÜ tarnib laias suuruses ja erinevatest materjalidest O-rõngaid, mis muudavad need sobivaks mitmesuguste töötingimuste ja rakenduste jaoks. Neid on lihtne paigaldada ja need võimaldavad lihtsa ja kulutõhusa tihendikorpuse disaini.
- Lisa korvi
-
KAELUSTIHEND 14 X 30 X 7 HMSA10 V VITON SKF
- 10,54 € (sis. KM)
- 14X30X7 HMSA10 V Radial shaft seal with rubber outside diameter and single sealing lip, for oil or grease Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. HMSA10 seals are designed with a rubber outside diameter. They have a conventional sealing lip made of elastomer. A garter spring in the seal and…
- Lisa korvi
-
KIILRIHM SILE Z39 10X991Li SKF
- 7,19 € (sis. KM)
- PHG Z39 Wrapped classical V-belt Belts provide a very efficient and cost-effective method for transmitting power from prime movers to driven machines. Classical V-belts have pre-tensioned polyester cords that provide low stretch during operation and a fibre-loaded rubber cushion that gives good transverse rigidity. Being fully wrapped in a heavy duty industrial fabric, the belts have a high resistance against…
- Lisa korvi
-
RIHMA PINGSUSE MÕÕTJA TKBT 10 SKF
- 1736,00 € (sis. KM)
- TKBT 10 Belt tension meter The belt tension meter is a portable and user-friendly instrument designed to ensure optimal belt performance and longevity. It enables precise measurement of belt natural frequency and belt tension in various belt types, including V-belts, toothed belts, ribbed belts, drive belts, and conveyor belts. With its flexible neck sensor and optional accessories, the instrument is…
- Lisa korvi
-
LUKUSTUSMUTRIVÕTI HN 10-11 SKF
- 49,17 € (sis. KM)
- HN 10-11 Hook spanner The SKF Hook spanner, size 10 - 11, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 68 - 75 mm. To be more specific for locknuts: KM…
- Lisa korvi
-
LUKUSTUSMUTRIVÕTI HN 8-9 SKF
- 44,14 € (sis. KM)
- HN 8-9 Hook spanner The SKF Hook spanner, size 8 - 9, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 58 - 65 mm. To be more specific for locknuts: KM…
- Lisa korvi
