Skip to content
-
-
-
Laost otsas
-
100,91 € (sis. KM)
- 6202-2Z/VA228 Deep groove ball bearing for high temperature applications with shields on both sides Single row deep groove ball bearings for high temperature applications, with shields on both sides, are designed for challenging operating conditions, with certain variants being capable of performing at temperatures as high as 350 °C (660 °F). They have larger radial internal clearances and use graphite-based…
- Loe edasi
-
-
-
-
Laost otsas
-
880,05 € (sis. KM)
- QJ 222 N2MA Four-point contact ball bearing with locating slots Four-point contact ball bearings with locating slots can accommodate high axial loads in both directions and small radial loads. They can operate at very high speeds and are more suitable than deep groove ball bearings for supporting large axial forces. The outer ring, with ball and cage assembly, can be…
- Loe edasi
-
-
-
-
-
-
Laost otsas
-
175,11 € (sis. KM)
- SIKAC 30 M/VZ019 Rod end, requires maintenance, female thread These SKF rod ends contain a spherical plain bearing with a steel/bronze sliding contact surface combination. The bearing requires maintenance, sizes 6 and larger can be relubricated via a grease fitting in the housing and via the shank. The female thread is available with a left- (prefix SIL) or right-hand thread.…
- Loe edasi
-
-
Laost otsas
-
95,70 € (sis. KM)
- TSN 224 A V-ring seal V-ring seals consist of a V-ring and a sheet steel sealing washer with a vulcanized rubber lip. The rubber lip fits into the seal groove in the housing. The washer is protected against corrosion. The seals are used to protect bearings from contamination or as secondary seals to protect primary seals in highly contaminated environments.…
- Loe edasi
-
-
Laost otsas
-
138,57 € (sis. KM)
- GEM 60 ES-2RS Radial spherical plain bearing, requiring maintenance, sealed, metric sizes Radial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment. This specific design includes a steel/steel sliding contact surface combination, an extended inner ring and a double-lip contact seal on both sides. The bearings require maintenance and can be relubricated…
- Loe edasi
