Skip to content
-
-
-
26,78 € (sis. KM)
- 140X180X12 HMSA10 RG Radial shaft seal with rubber outside diameter and single sealing lip, for oil or grease Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. HMSA10 seals are designed with a rubber outside diameter. They have a conventional sealing lip made of elastomer. A garter spring in the seal and…
- Lisa korvi
-
-
-
11,59 € (sis. KM)
- FRB 14/160 Locating (stabilizing) ring A bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating…
- Lisa korvi
-
-
-
-
-
-
-
-
-
-
-
31,52 € (sis. KM)
- 6011-2Z Deep groove ball bearing with seals or shields Single row deep groove ball bearings with seals or shields are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing…
- Lisa korvi
-