Skip to content
-
-
-
7,19 € (sis. KM)
- PHG Z39 Wrapped classical V-belt Belts provide a very efficient and cost-effective method for transmitting power from prime movers to driven machines. Classical V-belts have pre-tensioned polyester cords that provide low stretch during operation and a fibre-loaded rubber cushion that gives good transverse rigidity. Being fully wrapped in a heavy duty industrial fabric, the belts have a high resistance against…
- Lisa korvi
-
-
-
1736,00 € (sis. KM)
- TKBT 10 Belt tension meter The belt tension meter is a portable and user-friendly instrument designed to ensure optimal belt performance and longevity. It enables precise measurement of belt natural frequency and belt tension in various belt types, including V-belts, toothed belts, ribbed belts, drive belts, and conveyor belts. With its flexible neck sensor and optional accessories, the instrument is…
- Lisa korvi
-
-
-
49,17 € (sis. KM)
- HN 10-11 Hook spanner The SKF Hook spanner, size 10 - 11, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 68 - 75 mm. To be more specific for locknuts: KM…
- Lisa korvi
-
-
-
44,14 € (sis. KM)
- HN 8-9 Hook spanner The SKF Hook spanner, size 8 - 9, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 58 - 65 mm. To be more specific for locknuts: KM…
- Lisa korvi
-
-
-
40,11 € (sis. KM)
- HN 7 Hook spanner The SKF Hook spanner, size 7, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 52 - 55 mm. To be more specific for locknuts: KM 7, KMK…
- Lisa korvi
-
-
-
33,42 € (sis. KM)
- HN 5-6 Hook spanner The SKF Hook spanner, size 5 - 6, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 38 - 45 mm. To be more specific for locknuts: KM…
- Lisa korvi
-
-
-
33,42 € (sis. KM)
- HN 4 Hook spanner The SKF Hook spanner, size 4, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 30 - 32 mm. To be more specific for locknuts: KM 4, KMK…
- Lisa korvi
-
-
-
620,00 € (sis. KM)
- TMFT 36/PRO Bearing fitting tool kit, PRO version The PRO fitting tool ensures that the task of mounting bearings has become quicker, safer and easier. Due to the supplied ‘heavy weight’ hammer it only requires a few hits to tap the bearing or seal into place. The sleeves come with handguard protection to protect hands while hammering is taking place,…
- Lisa korvi
-
-
-
7,69 € (sis. KM)
- PHG AX25EP Cogged raw-edge classical V-belt Belts provide a very efficient and cost-effective method for transmitting power from prime movers to driven machines. These raw-edge classical V-belts have cogs on their inside to enable the belts to flex around smaller pulleys. Without fabric covering their flanks, raw-edge belts can provide a higher friction and a minimized loss of power through…
- Lisa korvi
-
-
-
5,43 € (sis. KM)
- O-rõngas O-rõngad säilitavad tihendi kontaktjõu tänu nende radiaalsele või aksiaalsele deformatsioonile tihendi korpuses kahe komponendi vahel. Memi Varustaja OÜ tarnib laias suuruses ja erinevatest materjalidest O-rõngaid, mis muudavad need sobivaks mitmesuguste töötingimuste ja rakenduste jaoks. Neid on lihtne paigaldada ja need võimaldavad lihtsa ja kulutõhusa tihendikorpuse disaini.
- Lisa korvi
-
-
-
-
2,57 € (sis. KM)
- O-rõngas O-rõngad säilitavad tihendi kontaktjõu tänu nende radiaalsele või aksiaalsele deformatsioonile tihendi korpuses kahe komponendi vahel. Memi Varustaja OÜ tarnib laias suuruses ja erinevatest materjalidest O-rõngaid, mis muudavad need sobivaks mitmesuguste töötingimuste ja rakenduste jaoks. Neid on lihtne paigaldada ja need võimaldavad lihtsa ja kulutõhusa tihendikorpuse disaini.
- Lisa korvi
