Skip to content
-
-
-
18,33 € (sis. KM)
- RIS 209 A Rubber seating ring for insert bearing Rubber seating rings in the RIS 2 series are primarily intended to cushion insert bearings in pressed steel pillow (plummer) block housings. Located between the bearing outer ring and housing bore, they dampen vibration and noise and enable the bearings to be displaced slightly in their housings and to accommodate minor…
- Lisa korvi
-
-
-
6,88 € (sis. KM)
- HK 1612 Drawn cup needle roller bearing with open ends Drawn cup needle roller bearings are typically used in applications where the housing bore cannot be used as a raceway for a needle roller and cage assembly, but where a very compact and economical bearing arrangement is required. Owing to their large number of rollers, the bearings have a high…
- Lisa korvi
-
-
-
25,48 € (sis. KM)
- 16009/C3 Deep groove ball bearing Single row deep groove ball bearings are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types. Simple, versatile and robust design Low friction…
- Lisa korvi
-
-
-
43,40 € (sis. KM)
- TSN 213 A V-ring seal V-ring seals consist of a V-ring and a sheet steel sealing washer with a vulcanized rubber lip. The rubber lip fits into the seal groove in the housing. The washer is protected against corrosion. The seals are used to protect bearings from contamination or as secondary seals to protect primary seals in highly contaminated environments.…
- Lisa korvi
-
-
-
52,33 € (sis. KM)
- 4SPB140TB Wedge belt pulley, taper bushed Wedge belt pulleys are designed to be used with wedge belts. They are available with one or several grooves, enabling multiple belts to run in parallel. The pulleys are easily mounted on the shafts using the appropriate taper bushings. Manufactured according to international standards Phosphate-coated for corrosion resistance Statically balanced (dynamic balancing available on…
- Lisa korvi
-
-
-
-
-
415,09 € (sis. KM)
- TMMR 250XL Reversible jaw puller, long arms The multi-purpose SKF Reversible Jaw Puller TMMR 250XL is designed for internal and external pulling jobs of bearings and other components such as gears and pulleys. The puller features an extra long arm set which can be extended further with optional arm extensions. The two arms of the puller can be mounted with…
- Lisa korvi
-
-
-
4,98 € (sis. KM)
- SKF Energy Efficient (E2) radiaalkuullaagrid SKF E2 radiaalkuullaagrid tagavad rohkem kui kahekordse kasutusea, vähendades samal ajal energiakulu. Konstruktsiooni täiustused vähendavad laagrite hõõrdekadusid vähemalt 30% võrra võrreldes sama suure SKF Explorer seeria laagriga. Selle tulemuseks on energiasääst.
- Lisa korvi
-
-
-
142,29 € (sis. KM)
- F4BC 30M-CPSS-DFH Square flanged ball bearing unit with set screw locking and narrow inner ring, composite housing, SKF Food Line These square flanged ball bearing units are designed especially for the food and beverage industries. They are chemical resistant, lightweight and strong. The unit consists of an insert bearing, with a narrow inner ring and set screw locking, and is…
- Lisa korvi
-
-
-
22,88 € (sis. KM)
- PHF FX20-25X34 FX keyless bushing, FX20 Bushings and hubs are available in many variants, offering specific benefits in power transmission applications ranging from automotive to papermaking. FX20 keyless bushings are designed to attach components to shafts using a 360-degree interference fit. With no keyway required, the shaft size can usually be reduced and only minimal machining is required. Installation is…
- Lisa korvi
-
-
-
37,15 € (sis. KM)
- YSA 208-2FK Insert bearing with tapered bore and adapter sleeve locking Insert bearings are based on sealed deep groove ball bearings. This variant, with a tapered bore, is suitable for applications with both constant and alternating directions of rotation. It is locked with an adapter sleeve, enabling quick and easy mounting onto the shaft. Adapter sleeve needs to be ordered…
- Lisa korvi
