SKF

Tekkis küsimus toodete leidmise või allahindluste kohta? Vaata ostujuhist

Filtrid
  • SOONRIHM PK 1390 8 HARJA -SKF- Kiirvaade
  • KIILRIHM HAMMASTATUD VKMV 13AVX1000 -SKF- Kiirvaade
  • SOONRIHM PK 751 6 HARJA -SKF- Kiirvaade
  • SIKAC 20 M LIIGENDLAAGER EMANE d-20MM M20x1,5 SKF Kiirvaade
    • Laost otsas
      SIKAC 20 M LIIGENDLAAGER EMANE d-20MM M20x1,5 SKF Kiirvaade

    • SIKAC 20 M LIIGENDLAAGER EMANE d-20MM M20x1,5 SKF

    • 93,20 € (sis. KM)
    • SIKAC 20 M Rod end, requires maintenance, female thread These SKF rod ends contain a spherical plain bearing with a steel/bronze sliding contact surface combination. The bearing requires maintenance, sizes 6 and larger can be relubricated via a grease fitting in the housing and via the shank. The female thread is available with a left- (prefix SIL) or right-hand thread.…
    • Loe edasi
  • TXL611 KORPUSE TIHENDI KOMPLEKT 50MM VÕLLILE (ASENDAB TSN611 L) SKF Kiirvaade
    • Laost otsas
      TXL611 KORPUSE TIHENDI KOMPLEKT 50MM VÕLLILE (ASENDAB TSN611 L) SKF Kiirvaade

    • TXL611 KORPUSE TIHENDI KOMPLEKT 50MM VÕLLILE (ASENDAB TSN611 L) SKF

    • 17,71 € (sis. KM)
    • TXL 611 Lip seal with internal gap-type seal These seals provide effective sealing against many contaminants and allow for some grease to be purged when relubricating the bearing. Benchmark testing has proven low friction and outstanding service life. In highly contaminated environments, they provide the first barrier in a three-barrier solution. When ordering, please note that one item (seal pack)…
    • Loe edasi
  • BEAS 012042 C-2RSH KAHEREALINE TÄPPISTUGILAAGER KUMMIKATETEGA SKF Kiirvaade
    • Laost otsas
      BEAS 012042 C-2RSH KAHEREALINE TÄPPISTUGILAAGER KUMMIKATETEGA SKF Kiirvaade

    • BEAS 012042 C-2RSH KAHEREALINE TÄPPISTUGILAAGER KUMMIKATETEGA SKF

    • 349,16 € (sis. KM)
    • BEAS 012042 C-2RSH Super-precision double direction angular contact thrust ball bearing for screw drives These double direction angular contact thrust ball bearings are well suited for screw drive applications, but are also beneficial in other applications, where reliable radial and axial support is required, together with extremely precise axial guidance of the shaft. The bearings provide a high degree of…
    • Loe edasi
  • P2BC 50M-TPSS PUKKLAAGER d-50MM KOMPOSIIT + SS LAAGER SKF FOOD LINE Kiirvaade
    • Laost otsas
      P2BC 50M-TPSS PUKKLAAGER d-50MM KOMPOSIIT + SS LAAGER SKF FOOD LINE Kiirvaade

    • P2BC 50M-TPSS PUKKLAAGER d-50MM KOMPOSIIT + SS LAAGER SKF FOOD LINE

    • 322,10 € (sis. KM)
    • P2BC 50M-TPSS Pillow block ball bearing unit with extended inner ring and set screw locking, composite Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a composite housing that is lightweight but robust and has excellent corrosion resistance. This variant is suitable for applications with both constant and alternating directions of rotation. It has an inner…
    • Loe edasi
  • 7330 BCBM RADIAALTUGIKUULLAAGER SKF Kiirvaade
    • Laost otsas
      7330 BCBM RADIAALTUGIKUULLAAGER SKF Kiirvaade

    • 7330 BCBM RADIAALTUGIKUULLAAGER SKF

    • 1478,29 € (sis. KM)
    • 7330 BCBM Single row angular contact ball bearing These single row angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They can operate at high speeds and, depending on the variant, even very high speeds. They are more suitable than deep groove ball bearings for supporting large axial…
    • Loe edasi
  • NU230 ECJ/C3 SILINDERRULL-LAAGER NU 230 ECJ/C3 150X270X45 SKF Kiirvaade
    • Laost otsas
      NU230 ECJ/C3 SILINDERRULL-LAAGER NU 230 ECJ/C3 150X270X45 SKF Kiirvaade

    • NU230 ECJ/C3 SILINDERRULL-LAAGER NU 230 ECJ/C3 150X270X45 SKF

    • 684,05 € (sis. KM)
    • NU 230 ECJ/C3 Single row cylindrical roller bearing, NU design Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and no flanges on the inner ring, NU design bearings can accommodate axial displacement in both directions. An important feature is the separable design, which…
    • Loe edasi
  • TIH 030M/230V INDUKTSIOONKUUMUTI SKF Kiirvaade
    • Laost otsas
      TIH 030M/230V INDUKTSIOONKUUMUTI SKF Kiirvaade

    • TIH 030M/230V INDUKTSIOONKUUMUTI SKF

    • 4956,65 € (sis. KM)
    • TIH 030M/230V Small induction heater The small induction heater and is designed for the hot mounting of bearings. This compact heater is ideal for use on workbenches, yet it can be easily carried for on-site applications. Supplied with three yokes and foldable support arms, the heater is capable of heating bearings with a bore diameters of 20 mm or more…
    • Loe edasi
  • TMMS 160 SKF KOLMESEKTSIOONILINE TÕMMITSAPLAAT Kiirvaade
    • Laost otsas
      TMMS 160 SKF KOLMESEKTSIOONILINE TÕMMITSAPLAAT Kiirvaade

    • TMMS 160 SKF KOLMESEKTSIOONILINE TÕMMITSAPLAAT

    • 653,46 € (sis. KM)
    • TMMS 160 Tri-section pulling plate The tri-section pulling plate TMMS 160 is especially designed for use in combination with three-armed bearing pullers. The plate grips behind the inner ring of the bearing and prevents the pulling forces from being transmitted through the bearing, minimising the risk of bearing damage. Efficient bearing dismounting with unique design to direct dismounting forces directly…
    • Loe edasi
  • TMMS 380 SKF KOLMESEKTSIOONILINE TÕMMITSAPLAAT Kiirvaade
    • Laost otsas
      TMMS 380 SKF KOLMESEKTSIOONILINE TÕMMITSAPLAAT Kiirvaade

    • TMMS 380 SKF KOLMESEKTSIOONILINE TÕMMITSAPLAAT

    • 4429,40 € (sis. KM)
    • TMMS 380 Tri-section pulling plate The tri-section pulling plate TMMS 380 is especially designed for use in combination with three-armed bearing pullers. The plate grips behind the inner ring of the bearing and prevents the pulling forces from being transmitted through the bearing, minimising the risk of bearing damage. Efficient bearing dismounting with unique design to direct dismounting forces directly…
    • Loe edasi