Laagrid e‑poes – liug-, rull‑ ja nõellaagrid | Memi Varustaja

Tekkis küsimus toodete leidmise või allahindluste kohta? Vaata ostujuhist

Kiirvaade
- Laost otsas
  
  Kiirvaade
- QJ 222 N2MA RADIAALTUGIKUULLAAGER 110X200X38 SKF
- 880,05 € (sis. KM)
- QJ 222 N2MA Four-point contact ball bearing with locating slots Four-point contact ball bearings with locating slots can accommodate high axial loads in both directions and small radial loads. They can operate at very high speeds and are more suitable than deep groove ball bearings for supporting large axial forces. The outer ring, with ball and cage assembly, can be…
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- NU222-E-XL-M1-C3 SILINDERRULL-LAAGER 110X200X38 FAG
- 598,85 € (sis. KM)
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- F-569112.01 KL ÜHEREALINE KUULLAAGER KUMMIKATETEGA 75X130X31 FAG
- 675,01 € (sis. KM)
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- SIKAC 30 M/VZ019 LIIGEND-SARNIIRLAAGER d-30MM M27X2 EMANE SKF
- 175,11 € (sis. KM)
- SIKAC 30 M/VZ019 Rod end, requires maintenance, female thread These SKF rod ends contain a spherical plain bearing with a steel/bronze sliding contact surface combination. The bearing requires maintenance, sizes 6 and larger can be relubricated via a grease fitting in the housing and via the shank. The female thread is available with a left- (prefix SIL) or right-hand thread.…
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- TSN224 A KORPUSE TIHENDI KOMPLEKT 135MM VÕLLILE SKF
- 95,70 € (sis. KM)
- TSN 224 A V-ring seal V-ring seals consist of a V-ring and a sheet steel sealing washer with a vulcanized rubber lip. The rubber lip fits into the seal groove in the housing. The washer is protected against corrosion. The seals are used to protect bearings from contamination or as secondary seals to protect primary seals in highly contaminated environments.…
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- GEM60 ES-2RS LIIGEND-/SARNIIRLAAGER d-60MM SKF
- 138,57 € (sis. KM)
- GEM 60 ES-2RS Radial spherical plain bearing, requiring maintenance, sealed, metric sizes Radial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment. This specific design includes a steel/steel sliding contact surface combination, an extended inner ring and a double-lip contact seal on both sides. The bearings require maintenance and can be relubricated…
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- GIR20-DO-2RS LIIGEND-/SARNIIRLAAGER KUMMITIHENDITEGA d-20MM INA
- 64,48 € (sis. KM)
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- TME65-214-XL PUKKLAAGER d-65MM INA
- 367,44 € (sis. KM)
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- LIIGENDLAAGER d-70MM GE 70 LO
- 75,24 € (sis. KM)
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- RNA4903-2RSR-XL NÕELLAAGER SISEVÕRUTA; KUMMITIHENDITEGA 22X30X13 INA
- 35,07 € (sis. KM)
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- TUGIRULL 305803 C-2Z 17X47X17,5 SKF
- 86,87 € (sis. KM)
- 305803 C-2Z Cam roller (yoke-type track roller) with crowned outside surface, integral sealing and relubrication feature These cam rollers (yoke-type track rollers) are designed to run on all types of tracks and to be used in cam drives, conveyor systems, etc. They are based on double row angular contact ball bearings. They have a thick-walled outer ring with a crowned…
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- ÜHEREALINE KUULLAAGER METALLIKATETEGA 61906-2Z (6906 ZZ) 30X47X9 FAG
- 34,62 € (sis. KM)
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- LAHTINE ÜHEREALINE KUULLAAGER 6326/C3 130X280X58 SKF
- 655,66 € (sis. KM)
- 6326/C3 Deep groove ball bearing Single row deep groove ball bearings are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types. Simple, versatile and robust design Low friction…
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- ROOSTEVABA, HOOLDEVABA LIIGEND-/SARNIIRLAAGER d-12MM M12 ISANE KA 12-DNRBF ASKUBAL
- 51,65 € (sis. KM)
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- KOONUSPUKS SEADEKRUVIGA 80MM VÕLLILE H318 E SKF
- 95,50 € (sis. KM)
- H 318 E Adapter sleeve with KMFE lock nut, metric dimensions Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain shafts or stepped shafts. They are slit and are supplied complete with a KMFE lock nut. Easy to install Complete with lock nut
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- RULL-LAAGER CARB KOONUSAVAGA C 2218 K SKF
- 502,94 € (sis. KM)
- C 2218 K CARB toroidal roller bearing with tapered bore (1:12) CARB toroidal roller bearings are unique: as well as accommodating misalignment without increased stress levels, they also provide frictionless axial movement within the bearing in the non-locating position in self-aligning bearing arrangements. Being SKF Explorer bearings, they can accommodate higher load levels and provide significantly extended service life. Accommodate…
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- LIUGELAAGER ÕLIPRONKS PSM 142020 AMES 14X20X20
- 7,40 € (sis. KM)
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- LAAGRIKORPUS SNL505 SKF
- 199,62 € (sis. KM)
- SNL 505 Split plummer (pillow) block housing, SNL 2, 3, 5 and 6 series SNL plummer (pillow) block housings are the most popular SKF bearing housings on the market, developed to be the first choice for design, quality and economy. They enable the incorporated bearings to achieve maximum service life with less need for maintenance. Different housing variants and seal…
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- DISTANTSRÕNGAS FRB 3.5/52 SKF
- 5,21 € (sis. KM)
- FRB 3.5/52 Locating (stabilizing) ring A bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating…
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- RULL-LAAGER 20213-K-TVP-C3
- 321,53 € (sis. KM)
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- RULL-LAAGER 20210-K-TVP-C3
- 220,05 € (sis. KM)
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- ISOLEERITUD LAHTINE ÜHEREALINE KUULLAAGER 6326/C3VL2071 SKF INSOCOAT®
- 1477,93 € (sis. KM)
- 6326/C3VL2071 INSOCOAT® deep groove ball bearing INSOCOAT single row deep groove ball bearings feature an electrically insulating coating on the outside surfaces of either the inner or outer bearing ring. This keeps stray electric currents from passing through the bearings, protecting them against electrical erosion damage and helping prevent lubricant degradation resulting from electric current discharge. As with deep groove…
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- METALLIKATETEGA ÜHEREALINE KUULLAAGER EKSTREEMTEMPERATUURILE <+350 6206-2Z/VA208 30X62X16 SKF
- 164,23 € (sis. KM)
- 6206-2Z/VA208 Deep groove ball bearing for high temperature applications with shields on both sides Single row deep groove ball bearings for high temperature applications, with shields on both sides, are designed for challenging operating conditions, with certain variants being capable of performing at temperatures as high as 350 °C (660 °F). They have larger radial internal clearances and use graphite-based…
- Loe edasi
Kiirvaade
- Laost otsas
  
  Kiirvaade
- KOONUSRULL-LAAGER JM207049/JM207010 NTN
- 69,87 € (sis. KM)
- Loe edasi

×