Tekkis küsimus toodete leidmise või allahindluste kohta? Vaata ostujuhist
-
UCP212 PUKKLAAGER d-60MM (P212 + UC212) CRAFT BEARINGS
- 38,39 € (sis. KM)
- Lisa korvi
-
F2BC 20M-CPSS-DFH PUKKLAAGER d-20MM KOMPOSIIT + SS Y-LAAGER + PÕHJATIHEND + UMBNE KAAS SKF FOOD LINE
- 110,56 € (sis. KM)
- F2BC 20M-CPSS-DFH Oval flanged ball bearing unit with set screw locking and narrow inner ring, composite housing, SKF Food Line These oval flanged ball bearing units are designed especially for the food and beverage industries. They are chemical resistant, lightweight and strong. The unit consists of an insert bearing, with a narrow inner ring and set screw locking, and is…
- Lisa korvi
-
21313 E SF. KAHEREALINE RULL-LAAGER SILINDERAVAGA 65X140X33 SKF
- 155,00 € (sis. KM)
- 21313 E Spherical roller bearing with relubrication features Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts. Also available on request…
- Lisa korvi
-
P2BN 80M-SRB-TRH PUKKLAAGER d-80MM FIKSEERITUD (ASENDAB SYNT80 F) SKF SWIFTLOCK
- 1008,90 € (sis. KM)
- P2BN 80M-SRB-TRH Pillow block roller bearing unit, metric series Roller bearing units are robust, ready-to-mount units that are lubricated and sealed at the factory for maximum service life. Pillow (plummer) block units can support rotating shafts while standing on a flat surface, or hanging on a wall or ceiling. The SKF SwiftLock combines easy mounting and a concentric tight fit…
- Lisa korvi
-
P2BN 80M-SRB-TRE PUKKLAAGER d-80MM UJUV (ASENDAB SYNT80 L) SKF SWIFTLOCK
- 973,40 € (sis. KM)
- P2BN 80M-SRB-TRE Pillow block roller bearing unit, metric series Roller bearing units are robust, ready-to-mount units that are lubricated and sealed at the factory for maximum service life. Pillow (plummer) block units can support rotating shafts while standing on a flat surface, or hanging on a wall or ceiling. The SKF SwiftLock combines easy mounting and a concentric tight fit…
- Lisa korvi
-
2308 ETN9/C3 KAHEREALINE ISESEADUV KUULLAAGER 40X90X33 SKF
- 100,69 € (sis. KM)
- 2308 ETN9/C3 Self-aligning ball bearing Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection. Accommodate static and dynamic misalignment Excellent high-speed…
- Lisa korvi
-
KMT6 LUKUSTUSMUTTER LUKUSTUSTIHVTIDEGA M30x1.5 SKF
- 65,53 € (sis. KM)
- KMT 6 Precision lock nut with locking pins KMT precision lock nuts are intended for applications where high precision, simple assembly and reliable locking are required. The three equally-spaced locking pins enable these lock nuts to be accurately positioned at right angles to the shaft. However, they can also be adjusted to compensate for slight angular deviations of adjacent components.…
- Lisa korvi
-
FRB5/130 DISTANTSRÕNGAS SKF
- 5,58 € (sis. KM)
- FRB 5/130 Locating (stabilizing) ring A bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating…
- Lisa korvi
-
22210 EK/C3 SF. KAHEREALINE RULL-LAAGER KOONUSAVAGA SKF
- 57,06 € (sis. KM)
- 22210 EK/C3 Spherical roller bearing with tapered bore and relubrication features Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts. Also…
- Lisa korvi
-
FY50 TF PUKKLAAGER d-50MM (FY510M + YAR210-2F) SKF
- 72,48 € (sis. KM)
- FY 50 TF Square flanged ball bearing unit with set screw locking, cast iron housing, ISO These square flanged ball bearing units are compliant with ISO standards. They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted…
- Lisa korvi
-
TERASKUUL D-40MM
- 17,05 € (sis. KM)
- Lisa korvi
-
6224/C3VL0241 ISOLEERITUD LAHTINE ÜHEREALINE KUULLAAGER INSOCOAT® SKF
- 1041,60 € (sis. KM)
- 6224/C3VL0241 INSOCOAT® deep groove ball bearing INSOCOAT single row deep groove ball bearings feature an electrically insulating coating on the outside surfaces of either the inner or outer bearing ring. This keeps stray electric currents from passing through the bearings, protecting them against electrical erosion damage and helping prevent lubricant degradation resulting from electric current discharge. As with deep groove…
- Lisa korvi
-
6313-2Z/C3GJN METALLIKATETEGA ÜHEREALINE KUULLAAGER KÕRGTEMPERATUURILE <+150 65X140X33 SKF
- 101,84 € (sis. KM)
- 6313-2Z/C3GJN Deep groove ball bearing with seals or shields Single row deep groove ball bearings with seals or shields are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing…
- Lisa korvi
-
22210 EK SF. KAHEREALINE RULL-LAAGER KOONUSAVAGA 50X90X23 SKF
- 59,64 € (sis. KM)
- 22210 EK Spherical roller bearing with tapered bore and relubrication features Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts. Also…
- Lisa korvi
-
6004-2Z/C3GJN METALLIKATETEGA ÜHEREALINE KUULLAAGER KÕRGTEMPERATUURILE <+150 20X42X12 SKF
- 12,65 € (sis. KM)
- 6004-2Z/C3GJN Deep groove ball bearing with seals or shields Single row deep groove ball bearings with seals or shields are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing…
- Lisa korvi
-
TSNG518 KORPUSE TIHENDI KOMPLEKT 80MM VÕLLILE TIMKEN
- 26,91 € (sis. KM)
- Lisa korvi
-
1726309-2RS ÜHEREALINE KUULLAAGER KUMMIKATETEGA, VÄLISVÕRU SFÄÄRILINE 45X100X25 TIMKEN
- 49,80 € (sis. KM)
- 1726309-2RS Insert bearing, with standard IR, sealed 2RS1 Insert bearings are based on sealed deep groove ball bearings. These insert bearings are suitable for applications where smooth running is a key operational parameter. It can accommodate heavier axial loads than any other insert bearing. The bearings are sealed on both sides, made of sheet steel reinforced NBR, and are fitted…
- Lisa korvi
-
1726209-2RS ÜHEREALINE KUULLAAGER KUMMIKATETEGA, VÄLISVÕRU SFÄÄRILINE 45X85X19 TIMKEN
- 36,46 € (sis. KM)
- 1726209-2RS Insert bearing, with standard IR, sealed 2RS1 Insert bearings are based on sealed deep groove ball bearings. These insert bearings are suitable for applications where smooth running is a key operational parameter. It can accommodate heavier axial loads than any other insert bearing. The bearings are sealed on both sides, made of sheet steel reinforced NBR, and are fitted…
- Lisa korvi
-
22228 CC/W33 SF. KAHEREALINE RULL-LAAGER SILINDERAVAGA 140X250X68 SKF
- 890,32 € (sis. KM)
- 22228 CC/W33 Spherical roller bearing with relubrication features Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts. Accommodate misalignment High load…
- Lisa korvi
-
H2324 KOONUSPUKS 110MM VÕLLILE SKF
- 209,57 € (sis. KM)
- H 2324 Adapter sleeve with KM lock nut and MB lock washer, metric dimensions Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain shafts or stepped shafts. They are slit and are supplied complete with a KM lock nut and a MB lock…
- Lisa korvi
