Tekkis küsimus toodete leidmise või allahindluste kohta? Vaata ostujuhist
-
GE30 TXE-2RS HOOLDEVABA LIIGENDLAAGER KUMMITIHENDITEGA d-30MM SKF
- 54,99 € (sis. KM)
- GE 30 TXE-2RS Radial spherical plain bearing, maintenance-free, metric sizes Radial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment. This specific design includes a steel/PTFE fabric sliding contact surface combination and the bearings are maintenance-free. Except for those with designation suffix TXGR, they have a double-lip contact seal (-2RS) or a…
- Lisa korvi
-
KUULLIIGEND VASAK KEERE M6 DIN71802-10-M6L-C
- 6,40 € (sis. KM)
- Lisa korvi
-
SALKB 6 F HOOLDEVABA LIIGENDPEA d-6MM M6 VASAK KEERE, VÄLISKEERE SKF
- 24,55 € (sis. KM)
- SALKB 6 F Rod end, maintenance-free, male thread These SKF rod ends have an injection moulded sliding layer of PTFE FRP between the housing and the inner ring. This sliding contact surface combination is maintenance-free. The male thread is available with a left- (prefix SAL) or right-hand thread. Long service life Maintenance-free Relatively insensitive to contaminants Low coefficient of friction…
- Lisa korvi
-
SIKAC 20 M LIIGENDLAAGER EMANE d-20MM M20x1,5 SKF
- 93,20 € (sis. KM)
- SIKAC 20 M Rod end, requires maintenance, female thread These SKF rod ends contain a spherical plain bearing with a steel/bronze sliding contact surface combination. The bearing requires maintenance, sizes 6 and larger can be relubricated via a grease fitting in the housing and via the shank. The female thread is available with a left- (prefix SIL) or right-hand thread.…
- Lisa korvi
-
KUULLIIGEND M6 DIN 71802-C10-M6 -FLURO-
- 11,31 € (sis. KM)
- Lisa korvi
-
KUULLIIGEND M5 DIN71802-CS8-M5 -FLURO-
- 5,82 € (sis. KM)
- Lisa korvi
-
LIIGEND-/SARNIIRLAAGER d-25MM GEH25 ES-2RS SKF
- 46,15 € (sis. KM)
- GEH 25 ES-2RS Radial spherical plain bearing, requiring maintenance, sealed, metric sizes These radial spherical plain bearings have a steel/steel sliding contact surface combination and a double-lip contact seal on both sides. The bearings require maintenance and can be relubricated via lubrication holes and an annular groove in both rings. Compared to the GE series, they have a wider inner…
- Lisa korvi
-
LIIGENDLAAGER d-90MM GE 90 ES
- 91,82 € (sis. KM)
- Lisa korvi
