Skip to content
-
-
-
75,33 € (sis. KM)
- Compact: Performance on the smallest pulleys The new tooth form, developed through FEM modulation and practical tests, continues to enable very small minimum pulley diameters for internal pulleys. In addition, the optibelt SUPER XE-POWER PRO M=S is now also suitable for external pulleys. This is the prerequisite for designing more compact drive units. Totally versatile: Anything but conventional The optibelt…
- Lisa korvi
-
-
-
37,16 € (sis. KM)
- SPA1700 Wrapped wedge belt Belts provide a very efficient and cost-effective method for transmitting power from prime movers to driven machines. Wedge belts have pre-tensioned polyester cords that provide low stretch during operation and a fibre-loaded rubber cushion that provides good transverse rigidity. Being fully wrapped in a heavy duty industrial fabric, the belts have a high resistance against abrasion.…
- Lisa korvi
-
-
-
7,01 € (sis. KM)
- O-rõngas O-rõngad säilitavad tihendi kontaktjõu tänu nende radiaalsele või aksiaalsele deformatsioonile tihendi korpuses kahe komponendi vahel. Memi Varustaja OÜ tarnib laias suuruses ja erinevatest materjalidest O-rõngaid, mis muudavad need sobivaks mitmesuguste töötingimuste ja rakenduste jaoks. Neid on lihtne paigaldada ja need võimaldavad lihtsa ja kulutõhusa tihendikorpuse disaini.
- Lisa korvi
-
-
-
5,58 € (sis. KM)
- O-rõngas O-rõngad säilitavad tihendi kontaktjõu tänu nende radiaalsele või aksiaalsele deformatsioonile tihendi korpuses kahe komponendi vahel. Memi Varustaja OÜ tarnib laias suuruses ja erinevatest materjalidest O-rõngaid, mis muudavad need sobivaks mitmesuguste töötingimuste ja rakenduste jaoks. Neid on lihtne paigaldada ja need võimaldavad lihtsa ja kulutõhusa tihendikorpuse disaini.
- Lisa korvi
-
-
-
3,11 € (sis. KM)
- O-rõngas O-rõngad säilitavad tihendi kontaktjõu tänu nende radiaalsele või aksiaalsele deformatsioonile tihendi korpuses kahe komponendi vahel. Memi Varustaja OÜ tarnib laias suuruses ja erinevatest materjalidest O-rõngaid, mis muudavad need sobivaks mitmesuguste töötingimuste ja rakenduste jaoks. Neid on lihtne paigaldada ja need võimaldavad lihtsa ja kulutõhusa tihendikorpuse disaini.
- Lisa korvi
-
-
-
10,54 € (sis. KM)
- 14X30X7 HMSA10 V Radial shaft seal with rubber outside diameter and single sealing lip, for oil or grease Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. HMSA10 seals are designed with a rubber outside diameter. They have a conventional sealing lip made of elastomer. A garter spring in the seal and…
- Lisa korvi
-
-
-
7,19 € (sis. KM)
- PHG Z39 Wrapped classical V-belt Belts provide a very efficient and cost-effective method for transmitting power from prime movers to driven machines. Classical V-belts have pre-tensioned polyester cords that provide low stretch during operation and a fibre-loaded rubber cushion that gives good transverse rigidity. Being fully wrapped in a heavy duty industrial fabric, the belts have a high resistance against…
- Lisa korvi
-
-
-
49,17 € (sis. KM)
- HN 10-11 Hook spanner The SKF Hook spanner, size 10 - 11, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 68 - 75 mm. To be more specific for locknuts: KM…
- Lisa korvi
-
-
-
44,14 € (sis. KM)
- HN 8-9 Hook spanner The SKF Hook spanner, size 8 - 9, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 58 - 65 mm. To be more specific for locknuts: KM…
- Lisa korvi
-
-
-
40,11 € (sis. KM)
- HN 7 Hook spanner The SKF Hook spanner, size 7, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 52 - 55 mm. To be more specific for locknuts: KM 7, KMK…
- Lisa korvi
-
-
-
33,42 € (sis. KM)
- HN 5-6 Hook spanner The SKF Hook spanner, size 5 - 6, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 38 - 45 mm. To be more specific for locknuts: KM…
- Lisa korvi
-
-
-
33,42 € (sis. KM)
- HN 4 Hook spanner The SKF Hook spanner, size 4, is designed for easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. They fit on a variety of lock nuts with outer diameter(s) 30 - 32 mm. To be more specific for locknuts: KM 4, KMK…
- Lisa korvi
-
-
-
7,69 € (sis. KM)
- PHG AX25EP Cogged raw-edge classical V-belt Belts provide a very efficient and cost-effective method for transmitting power from prime movers to driven machines. These raw-edge classical V-belts have cogs on their inside to enable the belts to flex around smaller pulleys. Without fabric covering their flanks, raw-edge belts can provide a higher friction and a minimized loss of power through…
- Lisa korvi
-
-
-
5,43 € (sis. KM)
- O-rõngas O-rõngad säilitavad tihendi kontaktjõu tänu nende radiaalsele või aksiaalsele deformatsioonile tihendi korpuses kahe komponendi vahel. Memi Varustaja OÜ tarnib laias suuruses ja erinevatest materjalidest O-rõngaid, mis muudavad need sobivaks mitmesuguste töötingimuste ja rakenduste jaoks. Neid on lihtne paigaldada ja need võimaldavad lihtsa ja kulutõhusa tihendikorpuse disaini.
- Lisa korvi
-
-
-
-
2,57 € (sis. KM)
- O-rõngas O-rõngad säilitavad tihendi kontaktjõu tänu nende radiaalsele või aksiaalsele deformatsioonile tihendi korpuses kahe komponendi vahel. Memi Varustaja OÜ tarnib laias suuruses ja erinevatest materjalidest O-rõngaid, mis muudavad need sobivaks mitmesuguste töötingimuste ja rakenduste jaoks. Neid on lihtne paigaldada ja need võimaldavad lihtsa ja kulutõhusa tihendikorpuse disaini.
- Lisa korvi
-
-
-
-
-
-
-
27,71 € (sis. KM)
- Nozzle tube Angled, 175 mm Nozzle tube Straight, 140 mm Lubricating nozzles 4 units
- Lisa korvi
-
-
-
12,40 € (sis. KM)
- O-rõngas O-rõngad säilitavad tihendi kontaktjõu tänu nende radiaalsele või aksiaalsele deformatsioonile tihendi korpuses kahe komponendi vahel. Memi Varustaja OÜ tarnib laias suuruses ja erinevatest materjalidest O-rõngaid, mis muudavad need sobivaks mitmesuguste töötingimuste ja rakenduste jaoks. Neid on lihtne paigaldada ja need võimaldavad lihtsa ja kulutõhusa tihendikorpuse disaini.
- Lisa korvi
-
-
-
22,92 € (sis. KM)
- T5-650-16 Metric timing belt, T section Belts provide a very efficient and cost-effective method for transmitting power from prime movers to driven machines. Metric timing belts have teeth that interlock with the corresponding grooves on the pulleys to ensure a constant speed ratio. The combination of high tensile steel cords and a wear-resistant polyurethane rubber cushion provides dimensionally stable and…
- Lisa korvi
-
-
-
25,82 € (sis. KM)
- 640-8M (RPP8) -20 Belts provide a very efficient and cost-effective method for transmitting power from prime movers to driven machines. High torque drive (HTD) timing belts have teeth that interlock with the corresponding grooves on the pulleys to ensure a constant speed ratio. The low stretch glass fibre cords guarantee excellent dimensional stability. The oil and heat resistant neoprene rubber…
- Lisa korvi
