50,35  (sis. KM)

4 laos (Laki 26)

Tootekood: 7207 BE-2RZP Kategooriad: ,

Kirjeldus

7207 BE-2RZP
Single row angular contact ball bearing with 40° contact angle and non-contact seals on both sides
These single row angular contact ball bearings, with 40° contact angle and non-contact seals on both sides, accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They have a ball-centred glass-fibre reinforced PA66 cage. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.
40° contact angle
Integral sealing prolongs bearing service life
Glass-fibre reinforced PA66 cage
Accommodate relatively high radial loads and large unilateral axial loads

DIMENSIONS
Bore diameter 35 mm
Contact angle 40 °
Outside diameter 72 mm
Width 17 mm

PERFORMANCE
Basic dynamic load rating 29.1 kN
Basic static load rating 19 kN
Limiting speed 9000 r/min
Reference speed 11000 r/min

PROPERTIES
Axial internal clearance Not applicable
Cage Non-metallic
Coating Without
Contact type Normal contact (two-point contact)
Locating feature, bearing outer ring None
Lubricant Grease
Matched arrangement No
Material, bearing Bearing steel
Number of rows 1
Relubrication feature Without
Ring type One-piece inner and outer rings
Sealing Seal on both sides
Sealing type Non-contact
Universal matching bearing No