Tekkis küsimus toodete leidmise või allahindluste kohta? Vaata ostujuhist

Filtrid
  • TMMS 160 SKF KOLMESEKTSIOONILINE TÕMMITSAPLAAT Kiirvaade
    • Laost otsas
      TMMS 160 SKF KOLMESEKTSIOONILINE TÕMMITSAPLAAT Kiirvaade
    • TMMS 160 SKF KOLMESEKTSIOONILINE TÕMMITSAPLAAT

    • 653,46  (sis. KM)
    • TMMS 160 Tri-section pulling plate The tri-section pulling plate TMMS 160 is especially designed for use in combination with three-armed bearing pullers. The plate grips behind the inner ring of the bearing and prevents the pulling forces from being transmitted through the bearing, minimising the risk of bearing damage. Efficient bearing dismounting with unique design to direct dismounting forces directly…
    • Loe edasi
  • TMMS 380 SKF KOLMESEKTSIOONILINE TÕMMITSAPLAAT Kiirvaade
    • Laost otsas
      TMMS 380 SKF KOLMESEKTSIOONILINE TÕMMITSAPLAAT Kiirvaade
    • TMMS 380 SKF KOLMESEKTSIOONILINE TÕMMITSAPLAAT

    • 4429,40  (sis. KM)
    • TMMS 380 Tri-section pulling plate The tri-section pulling plate TMMS 380 is especially designed for use in combination with three-armed bearing pullers. The plate grips behind the inner ring of the bearing and prevents the pulling forces from being transmitted through the bearing, minimising the risk of bearing damage. Efficient bearing dismounting with unique design to direct dismounting forces directly…
    • Loe edasi
  • BS2-2216-2RS/VT143 KUMMIKATETEGA SF. RULL-LAAGER SILINDERAVAGA  SKF Kiirvaade
    • Laost otsas
      BS2-2216-2RS/VT143 KUMMIKATETEGA SF. RULL-LAAGER SILINDERAVAGA  SKF Kiirvaade
    • BS2-2216-2RS/VT143 KUMMIKATETEGA SF. RULL-LAAGER SILINDERAVAGA SKF

    • 253,38  (sis. KM)
    • BS2-2216-2RS/VT143 Spherical roller bearing with integral sealing Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. Under normal operating conditions, sealed bearings are almost maintenance-free, keeping service costs and grease consumption low. The design includes features to facilitate relubrication. Also available on…
    • Loe edasi
  • KAELUSTIHEND TOLLMÕÕDUS METALL + NBR 44.45 X 76.2 X 7.95 SKF Kiirvaade
    • Laost otsas
      KAELUSTIHEND TOLLMÕÕDUS METALL + NBR 44.45 X 76.2 X 7.95 SKF Kiirvaade
    • KAELUSTIHEND TOLLMÕÕDUS METALL + NBR 44.45 X 76.2 X 7.95 SKF

    • 20,68  (sis. KM)
    • 17699 Radial shaft seal with metal case, SKF Wave lip and auxiliary, contacting lip, for oil or grease Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWA1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, a garter…
    • Loe edasi
  • 7320 BEGAM RADIAALTUGIKUULLAAGER SKF Kiirvaade
    • Laost otsas
      7320 BEGAM RADIAALTUGIKUULLAAGER SKF Kiirvaade
    • 7320 BEGAM RADIAALTUGIKUULLAAGER SKF

    • 605,62  (sis. KM)
    • 7320 BEGAM Single row angular contact ball bearing These single row angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They can operate at high speeds and, depending on the variant, even very high speeds. They are more suitable than deep groove ball bearings for supporting large axial…
    • Loe edasi
  • 7326 BGAM RADIAALTUGIKUULLAAGER SKF Kiirvaade
    • Laost otsas
      7326 BGAM RADIAALTUGIKUULLAAGER SKF Kiirvaade
    • 7326 BGAM RADIAALTUGIKUULLAAGER SKF

    • 1184,82  (sis. KM)
    • 7326 BGAM Single row angular contact ball bearing These single row angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They can operate at high speeds and, depending on the variant, even very high speeds. They are more suitable than deep groove ball bearings for supporting large axial…
    • Loe edasi
  • TKTL 21 TERMOMEETER SKF Kiirvaade
    • Laost otsas
      TKTL 21 TERMOMEETER SKF Kiirvaade
    • TKTL 21 TERMOMEETER SKF

    • 528,24  (sis. KM)
    • TKTL 21 Advanced infrared thermometer with adjustable emissivity with contact probe SKF offers a wide range of portable, lightweight and easy-to-use infrared thermometers for thermal inspections. These portable tools help you to detect temperature differences in technical and non-technical applications, this in order to perceive information on abnormalities in operating. SKF Infrared thermometers are fitted with multiple lasers which helps…
    • Loe edasi
  • W6006-2RS1/W64 ROOSTEVABA ÜHEREALINE KUULLAAGER KUMMIKATETEGA SOLID OIL  SKF Food Line Kiirvaade
    • Laost otsas
      W6006-2RS1/W64 ROOSTEVABA ÜHEREALINE KUULLAAGER KUMMIKATETEGA SOLID OIL  SKF Food Line Kiirvaade
    • W6006-2RS1/W64 ROOSTEVABA ÜHEREALINE KUULLAAGER KUMMIKATETEGA SOLID OIL SKF Food Line

    • 106,39  (sis. KM)
    • 6006-2RS1/W64 Stainless steel deep groove ball bearing Single row deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They can accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance…
    • Loe edasi
  • 6202-2Z/VA228 ÜHEREALINE KUULLAAGER METALLIKATETEGA EKSTREEM TEMPERATUURILE <+350 °C SKF FOOD LINE Kiirvaade
  • QJ 222 N2MA RADIAALTUGIKUULLAAGER  110X200X38 SKF Kiirvaade
    • Laost otsas
      QJ 222 N2MA RADIAALTUGIKUULLAAGER  110X200X38 SKF Kiirvaade
    • QJ 222 N2MA RADIAALTUGIKUULLAAGER 110X200X38 SKF

    • 880,05  (sis. KM)
    • QJ 222 N2MA Four-point contact ball bearing with locating slots Four-point contact ball bearings with locating slots can accommodate high axial loads in both directions and small radial loads. They can operate at very high speeds and are more suitable than deep groove ball bearings for supporting large axial forces. The outer ring, with ball and cage assembly, can be…
    • Loe edasi
  • SIKAC 30 M/VZ019 LIIGEND-SARNIIRLAAGER d-30MM M27X2 EMANE SKF Kiirvaade
    • Laost otsas
      SIKAC 30 M/VZ019 LIIGEND-SARNIIRLAAGER d-30MM M27X2 EMANE SKF Kiirvaade
    • SIKAC 30 M/VZ019 LIIGEND-SARNIIRLAAGER d-30MM M27X2 EMANE SKF

    • 175,11  (sis. KM)
    • SIKAC 30 M/VZ019 Rod end, requires maintenance, female thread These SKF rod ends contain a spherical plain bearing with a steel/bronze sliding contact surface combination. The bearing requires maintenance, sizes 6 and larger can be relubricated via a grease fitting in the housing and via the shank. The female thread is available with a left- (prefix SIL) or right-hand thread.…
    • Loe edasi
  • TSN224 A  KORPUSE TIHENDI KOMPLEKT 135MM VÕLLILE  SKF Kiirvaade
    • Laost otsas
      TSN224 A  KORPUSE TIHENDI KOMPLEKT 135MM VÕLLILE  SKF Kiirvaade
    • TSN224 A KORPUSE TIHENDI KOMPLEKT 135MM VÕLLILE SKF

    • 95,70  (sis. KM)
    • TSN 224 A V-ring seal V-ring seals consist of a V-ring and a sheet steel sealing washer with a vulcanized rubber lip. The rubber lip fits into the seal groove in the housing. The washer is protected against corrosion. The seals are used to protect bearings from contamination or as secondary seals to protect primary seals in highly contaminated environments.…
    • Loe edasi