Tekkis küsimus toodete leidmise või allahindluste kohta? Vaata ostujuhist
-
- Laost otsas
ROOSTEVABA ÜHEREALINE KUULLAAGER SOLID OIL W 6203-2RS1/W64 SKF
- 165,08 € (sis. KM)
- Deep groove ball bearing Single row deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They can accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other…
- Loe edasi
-
-
- Laost otsas
RULL-LAAGER CARB C 5918-2CS5V/C3 SKF
- 678,38 € (sis. KM)
- Full complement CARB toroidal roller bearing with integral sealing CARB toroidal roller bearings are unique: as well as accommodating misalignment without increased stress levels, they also provide frictionless axial movement within the bearing in the non-locating position in self-aligning bearing arrangements. This bearing has a lower speed rating and is sealed to minimize the need for lubrication and extend service…
- Loe edasi
-
-
- Laost otsas
RATTALAAGER VKBA 1318 37X74X45 SKF
- 58,58 € (sis. KM)
- Loe edasi
-
-
- Laost otsas
LFMBA-3/8-D-MIDI-A PEENFILTRIKOMPLEKT FESTO
- 505,26 € (sis. KM)
- Loe edasi
-
-
- Laost otsas
HOOLDEVABA LIIGENDLAAGER d-8MM GE 8 C SKF
- 20,81 € (sis. KM)
- Loe edasi
-
-
- Laost otsas
TMFT 36 B25-47 SKF
- 26,10 € (sis. KM)
- Loe edasi
-
-
- Laost otsas
ÜHEREALINE KUULLAAGER METALLIKATETEGA 6308-2Z/C4 SKF
- 47,00 € (sis. KM)
- 6308-2Z/C4 Deep groove ball bearing with seals or shields Single row deep groove ball bearings with seals or shields are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing…
- Loe edasi
-
-
- Laost otsas
Y-LAAGER TOPELTTIHENDIGA d-50MM YAR 210-2RF SKF
- 53,77 € (sis. KM)
- YAR 210-2RF Insert bearing with set screw locking and extended inner ring Insert bearings are based on sealed deep groove ball bearings. This variant is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening two (set) screws on the inner ring,…
- Loe edasi
-
-
- Laost otsas
SIDURI KATTEKUMM FRAS PHE F180FRTYRE SKF
- 397,17 € (sis. KM)
- Loe edasi
-
-
- Laost otsas
SIDURI FLANTS TL KINNITUSEGA PHE F180HTBFLG SKF
- 1172,32 € (sis. KM)
- Loe edasi
-
-
- Laost otsas
LIIGENDPEA d-40MM M35x1.5 SIR 40 ES SKF
- 186,00 € (sis. KM)
- Analoogtooted: DGIHR-K 40 DO DURBAL FPR 40 U/TAPR 40 U FLURO GIHRK40-DO-B INA
- Loe edasi
-
-
- Laost otsas
CALIBRATED MODAL HAMMER KIT CMAC 5056 SKF
- 11017,40 € (sis. KM)
- Loe edasi
-
