UNIVERSAALNE HYBRID TÄPPISLAAGER KUMMIKATETEGA S71913 CDGA/HCP4A SKF

Kirjeldus

S71913 CDGA/HCP4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing with seals
These super-precision, high-capacity, single row angular contact ball bearings, with non-contact seals, accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They are designed to accommodate heavy loads at relatively high speeds under low to moderate operating temperatures. Being universally matchable, they can be used together in arrangements to provide effective load sharing, without the use of shims or similar devices.
Very high running accuracy
Very high load carrying capacity
Universally matchable
Non-contact seals
Integral sealing prolongs bearing service life

DIMENSIONS
Bore diameter 65 mm
Outside diameter 90 mm
Width 13 mm
Contact angle 15 °

PERFORMANCE
Basic dynamic load rating 20.8 kN
Basic static load rating 17 kN
Note Contact SKF for the attainable speeds

PROPERTIES
Contact type Normal contact (two-point contact)
Number of rows 1
Ring type One-piece inner and outer rings
Design High-capacity D
Universal matching bearing Yes, back-to-back (), face-to-face (>>)
Matched arrangement No
Matched condition (axial clearance/ preload) Measuring load, class A
Tolerance class P4A
Material, bearing Hybrid
Coating Without
Sealing Seal on both sides
Sealing type Non-contact
Lubricant Grease