PUKKLAAGER HEAVY SERIES d-100MM UCP 320 -SKF-

Kirjeldus

UCP 320
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards
Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.
Strong
Designed for a constant and alternating rotation
Ready to mount
Lubricated and sealed bearing
Quick locking onto the shaft
Cost-effective

DIMENSIONS
Bearing width, total 108 mm
Centre distance between bolt holes 380.5 mm
Centre height (pillow block) 140 mm
Housing overall width 107 mm
Shaft diameter 100 mm

PERFORMANCE
Basic dynamic load rating 174 kN
Basic static load rating 140 kN
Limiting speed 1700 r/min

PROPERTIES
Bore type Cylindrical
Coating Without
Fastening bolt hole type – remove Plain
Housing type Pillow block
Lubricant Grease
Material, bearing Bearing steel
Material, housing Cast iron
Number of bolt holes for fasteners 2
Relubrication hole With
Relubrication nipple With
Retaining feature, inner ring Set screws
Rubber seating ring Without
Sealing type Contact
Sealing, bearing Seal and flinger on both sides
Sealing, unit Without