PUKKLAAGER d-70MM UCP214 (P214 + UC214) SKF

Kirjeldus

UCP 214
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards
Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.
Strong
Designed for a constant and alternating rotation
Ready to mount
Lubricated and sealed bearing
Quick locking onto the shaft
Cost-effective

DIMENSIONS
Bearing width, total 74.6 mm
Centre distance between bolt holes 210 mm
Centre height (pillow block) 79.4 mm
Housing overall width 72 mm
Shaft diameter 70 mm

PERFORMANCE
Basic dynamic load rating 62.4 kN
Basic static load rating 44 kN
Limiting speed 2250 r/min
Note Limiting speed with shaft tolerance h6

PROPERTIES
Bore type Cylindrical
Coating Without
Fastening bolt hole type Plain
Grease fitting With
Housing type Pillow block
Lubricant Grease
Material, bearing Bearing steel
Material, housing Cast iron
Number of bolt holes for fasteners 2
Relubrication hole With
Retaining feature, inner ring Set screws
Rubber seating ring Without
Sealing type Contact, standard
Sealing, bearing Seal and flinger on both sides
Sealing, unit Without

COMPONENT
Pillow block housing for insert bearings, cast iron P 214/Y
Insert bearing with set screw locking and extended inner ring UC 214