PUKKLAAGER d-50mm UCPA 210/H (PA210+UC210) SKF

Kirjeldus

UCPA 210/H
Short base pillow block ball bearing unit with extended inner ring and set screw locking, Japanese Industrial Standards
Short base pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing. This variant has threaded holes for attachment bolts and is suitable for applications where the direction of rotation is constant or alternating. It has an inner ring extended on both sides and is locked onto the shaft by tightening two set screws on the inner ring, making it easy to mount. The units are compliant with Japanese Industrial Standards (JIS).
Optimized for applications where space is limited
Ready to mount
Lubricated and sealed bearing
Quick locking onto the shaft
Extended inner ring for minimized shaft misalignment

DIMENSIONS
Shaft diameter 50 mm
Centre height (pillow block) 57.2 mm
Housing overall width 51 mm
Centre distance between bolt holes 94 mm
Bearing width, total 51.6 mm

PERFORMANCE
Basic dynamic load rating 35.1 kN
Basic static load rating 23.2 kN
Limiting speed 3300 r/min
Note Limiting speed with shaft tolerance h6

PROPERTIES
Housing type Pillow block
Number of bolt holes for fasteners 2
Fastening bolt hole type Threaded
Retaining feature, inner ring Set screws
Bore type Cylindrical
Rubber seating ring Without
Material, housing Cast iron
Material, bearing Bearing steel
Coating Without
Sealing, bearing Seal and flinger on both sides
Sealing type Contact, standard
Sealing, unit Without
Lubricant Grease
Relubrication hole With
Grease fitting With