PUKKLAAGER d-50MM UCF 310 (F310 + UC310) HEAVY SERIES -SKF-

Kirjeldus

UCF 310_pdf

UCF 310
Square flanged ball bearing unit with set screw locking, cast iron housing, JIS
These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.
Resist high levels of contamination
Designed for high temperatures and speeds
Accommodate relatively heavy loads
Cost-effective

DIMENSIONS
Bearing width, total 61 mm
Centre distance of bolt holes of pillow type, square and oval flange type housing 132 mm
Centre height (pillow block)
Housing overall width 49.5 mm
Pitch diameter of bolt holes of round and triangle flange type housing
Shaft diameter 50 mm

PERFORMANCE
Basic dynamic load rating 61.8 kN
Basic static load rating 38 kN
Limiting speed 3400 r/min

PROPERTIES
Bore type Cylindrical
Coating Without
Fastening bolt hole type Plain
Flanged housing type Square
Housing type Flanged
Lubricant Grease
Material, bearing Bearing steel
Material, housing Cast iron
Number of bolt holes for fasteners 4
Relubrication hole With
Relubrication nipple With
Retaining feature, inner ring Set screws
Rubber seating ring Without
Sealing type Contact
Sealing, bearing Seal and flinger on both sides
Sealing, unit Without