74,85 € (sis. KM)
8 laos (Laki 26)
Kirjeldus
SYJ 50 TF
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards
Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.
Strong
Ready to mount
Designed for a constant and alternating rotation
Lubricated and sealed bearing
Quick locking onto the shaft
Cost-effective
DIMENSIONS
Attachment bolt diameter 16 mm
Shaft diameter 50 mm
Centre height (pillow block) 57.2 mm
Housing overall width 58 mm
Centre distance between bolt holes 157.5 mm
Bearing width, total 51.6 mm
PERFORMANCE
Basic dynamic load rating 35.1 kN
Basic static load rating 23.2 kN
Limiting speed 4000 r/min
Note Limiting speed with shaft tolerance h6
PROPERTIES
Housing type Pillow block
Number of bolt holes for fasteners 2
Fastening bolt hole type Plain
Retaining feature, inner ring Set screws
Bore type Cylindrical
Rubber seating ring Without
Material, housing Cast iron
Material, bearing Bearing steel
Coating Without
Sealing, bearing Seal and flinger on both sides
Sealing type Contact, standard
Sealing, unit Without
Lubricant Grease
Relubrication hole With
Grease fitting With
COMPONENT
Pillow block housing for insert bearings, cast iron, Japanese standards SYJ 510
Insert bearing with set screw locking and extended inner ring YAR 210-2F
Seotud tooted
-
Y-LAAGER d-50MM YAR 210-2F -SKF-
- 48,86 € (sis. KM)
- Lisa korvi
-
PUKKLAAGER d-50MM UCP210 (P210 + UC210) SKF
- 56,06 € (sis. KM)
- Lisa korvi