PUKKLAAGER d-45MM FY 45 TF -SKF-

Kirjeldus

FY 45 TF
Three-bolt bracket flanged ball bearing unit with an extended inner ring and adapter sleeve locking, cast iron, , JIS standards
These three-bolt bracket flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and are locked to the shaft by an adapter sleeve, which enables the bearings to operate at higher speeds and run more smoothly in applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. The adapter sleeve is not included in the unit, and should be ordered separately.
Resist high levels of contamination
Designed for hightemperatures and speeds
Accommodate relatively heavy loads
Cost-effective

DIMENSIONS
Bearing width, total 49.2 mm
Centre distance between bolt holes 105 mm
Housing overall width 39 mm
Shaft diameter 45 mm

PERFORMANCE
Basic dynamic load rating 33.2 kN
Basic static load rating 21.6 kN
Limiting speed 4300 r/min

PROPERTIES
Bore type Cylindrical
Coating Without
Fastening bolt hole type Plain
Flanged housing type Square
Housing type Flanged
Lubricant Grease
Material, bearing Bearing steel
Material, housing Cast iron
Number of bolt holes for fasteners 4
Relubrication hole With
Relubrication nipple With
Retaining feature, inner ring Set screws
Rubber seating ring Without
Sealing type Contact, standard
Sealing, bearing Seal and flinger on both sides
Sealing, unit Without