PUKKLAAGER d-30MM FYTB30 TF (FYTB506 M + YAR206-2F) SKF

Kirjeldus

FYTB 30 TF
Oval flanged ball bearing unit with set screw locking, cast iron housing, ISO
These oval flanged ball bearing units are compliant with ISO standards. They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.
Resist high levels of contamination
Designed for high temperatures and speeds
Accommodate relatively heavy loads
Cost-effective

DIMENSIONS
Attachment bolt diameter 10 mm
Shaft diameter 30 mm
Housing overall width 32.5 mm
Width, total 42.2 mm
Centre distance between bolt holes 116.5 mm
Bearing width, total 38.1 mm

PERFORMANCE
Basic dynamic load rating 19.5 kN
Basic static load rating 11.2 kN
Limiting speed 6300 r/min
Note Limiting speed with shaft tolerance h6

PROPERTIES
Housing type Flanged
Flanged housing type Oval
Number of bolt holes for fasteners 2
Fastening bolt hole type Plain
Retaining feature, inner ring Set screws
Bore type Cylindrical
Rubber seating ring Without
Material, housing Cast iron
Material, bearing Bearing steel
Coating Without
Sealing, bearing Seal and flinger on both sides
Sealing type Contact, standard
Sealing, unit Optional end cover
Lubricant Grease
Relubrication hole With
Grease fitting With

COMPONENT
Oval flanged housing for insert bearings, cast iron FYTB 506 M
Insert bearing with set screw locking and extended inner ring YAR 206-2F