KAELUSTIHEND TOLLMÕÕT 41,275 X 63,551 X 7,95 METALL+NBR CRW1 SKF

Kirjeldus

16245
Radial shaft seal with metal case and SKF Wave lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a sealant coated metal case, a SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation. The seal also has a garter spring to optimize sealing against the shaft.
For oil or grease
With garter spring
WAVE lip creates higher pumping rate
WAVE lip has less friction between shaft and lip
WAVE lip has a lower temperature at the contact point

DIMENSIONS
Housing bore diameter 63.551 mm
Seal width 7.95 mm
Shaft diameter 41.275 mm

PERFORMANCE
Maximum operating temperature 100 °C
Minimum operating temperature -40 °C
Permissible circumferential speed 7.06 m/s
Rotational speed 3240 r/min

PROPERTIES
Auxiliary lip No
Design CRW1
Sealing lip material Nitrile rubber (NBR)
Unit system Inch

RECOMMENDED PRODUCT
SKF Speedi-Sleeve 99163