KAELUSTIHEND 8X18X7 HMSA10 V VITON SKF

7,38 € (sis. KM)

8 laos (Laki 26)

Radiaalvõllitihend 15X24X7
Radiaalvõlli tihendeid kasutatakse pöörlevate ja statsionaarsete masinaosade või suhtelise liikumisega komponentide vahel. HMSA10 tihendid on konstrueeritud kummist välisläbimõõduga. Neil on tavaline elastomeerist või termoplastist valmistatud tihendushuul. Tihendis olev sukapaelvedru ja mittekontaktne abihuul optimeerivad võlli vastu tihendamist ka saastunud keskkonnas.

Tootekood: 8X18X7 HMSA10 V Kategooriad: ,

Kirjeldus

8X18X7 HMSA10 V
Radial shaft seal with rubber outside diameter and single sealing lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. HMSA10 seals are designed with a rubber outside diameter. They have a conventional sealing lip made of elastomer. A garter spring in the seal and a non-contacting auxiliary lip optimize the sealing against the shaft also in polluted environment.
High pumping rate
Higher contamination exclusion with dust lip
With garter spring
Accommodate misalignment

DIMENSIONS
Shaft diameter 8 mm
Housing bore diameter 18 mm
Seal width 7 mm

PERFORMANCE
Maximum operating temperature 200 °C
Minimum operating temperature -20 °C
Permissible circumferential speed 4.64 m/s
Rotational speed 11077 r/min

PROPERTIES
Design HMSA10
Auxiliary lip Yes
Sealing lip material Fluoro rubber (FKM)
Type of outside diameter Rubber metal reinforced
Unit system Metric

Sulle võib meeldida ka…