KAELUSTIHEND 60 X 85 X 10 HMSA10 V VITON SKF

KAELUSTIHEND 60 X 85 X 10 HMSA10 V VITON SKF
KAELUSTIHEND 60 X 85 X 10 HMSA10 V VITON SKF - Image 2

25,08 € (sis. KM)

1 laos (Laki 26)

Radiaalvõllitihend 60X85X10 HMSA10 V
Radiaalvõlli tihendeid kasutatakse pöörlevate ja statsionaarsete masinaosade või suhtelise liikumisega komponentide vahel. HMSA10 tihendid on konstrueeritud kummist välisläbimõõduga. Neil on tavaline elastomeerist või termoplastist valmistatud tihendushuul. Tihendis olev sukapaelvedru ja mittekontaktne abihuul optimeerivad võlli vastu tihendamist ka saastunud keskkonnas.

Tootekood: 60X85X10 HMSA10 V Kategooriad: ,

Kirjeldus

60X85X10 HMSA10 V
Radial shaft seal with rubber outside diameter and single sealing lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. HMSA10 seals are designed with a rubber outside diameter. They have a conventional sealing lip made of elastomer. A garter spring in the seal and a non-contacting auxiliary lip optimize the sealing against the shaft also in polluted environment.
High pumping rate
Higher contamination exclusion with dust lip
With garter spring
Accommodate misalignment

DIMENSIONS
Housing bore diameter 85 mm
Seal width 10 mm
Shaft diameter 60 mm

PERFORMANCE
Maximum operating temperature 200 °C
Minimum operating temperature -20 °C
Permissible circumferential speed 27.2 m/s
Rotational speed 8700 r/min

PROPERTIES
Auxiliary lip Yes
Design HMSA10
Metric/inches measurement system Metric
Sealing lip material Fluoro rubber (FKM)

Sulle võib meeldida ka…