KAELUSTIHEND 15 X 24 X 7 HMSA10 V1 VITON -SKF-

KAELUSTIHEND 15 X 24 X 7 HMSA10 V1 VITON -SKF-
KAELUSTIHEND 15 X 24 X 7 HMSA10 V1 VITON -SKF- - Image 2

7,38 € (sis. KM)

10 laos (Laki 26)

Radiaalvõllitihend 15X24X7
Radiaalvõlli tihendeid kasutatakse pöörlevate ja statsionaarsete masinaosade või suhtelise liikumisega komponentide vahel. HMSA10 tihendid on konstrueeritud kummist välisläbimõõduga. Neil on tavaline elastomeerist või termoplastist valmistatud tihendushuul. Tihendis olev sukapaelvedru ja mittekontaktne abihuul optimeerivad võlli vastu tihendamist ka saastunud keskkonnas.

Tootekood: 15X24X7 HMSA10 V1 Kategooriad: ,

Kirjeldus

15X24X7 HMSA10 V1
Radial shaft seal with rubber outside diameter and single sealing lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. HMSA10 seals are designed with a rubber outside diameter. They have a conventional sealing lip made of elastomer or thermoplastic. A garter spring in the seal and a non-contacting auxiliary lip optimize the sealing against the shaft also in polluted environment.
High pumping rate
Higher contamination exclusion with dust lip
With garter spring
Accommodate misalignment

DIMENSIONS
Housing bore diameter 24 mm
Seal width 7 mm
Shaft diameter 15 mm

PERFORMANCE
Permissible circumferential speed 11.69 m/s
PROPERTIES
Auxiliary lip Yes
Design HMSA10
Metric/inches measurement system Metric
Sealing lip material Fluoro rubber (FKM)

Sulle võib meeldida ka…