INDUKTSIOONKUUMUTI TIH 220M/MV SKF

Kirjeldus

TIH 220M/MV
Large induction heater
The SKF TIH 220M is a large induction heater and is designed for the hot mounting of bearings. This versatile heater is ideal for use on workbenches and can easily be transported to on-site applications with the optional heater trolley TIH T1. The heater has a convenient sliding yoke and is supplied with an additional smaller yoke. The TIH 220M can heat bearings with a minimum bore diameter of 60 mm and larger bearings with a maximum weight of 300 kg.
Supplied with standard sliding yoke and one smaller yoke located in an integrated storage compartment
Easy and safe to use with automatic temperature control or time controlled heating
Automatic demagnetization reduces risk of bearing contamination
Suitable for non-bearing applications for workpieces weighing up to 150 kg
Automatic temperature hold function to keep the bearing hot after completion of the heating cycle

PROPERTIES
Colour Grey
Black
Heating temperature control 0 – 250 °C
Heating time control 0.1 – 60 min
Heating time steps 0.1min
Power consumption (max) 11.5kW
Power setting 50%
100%
Remote control panel (wired) Yes, with LED display
Thermometer mode Yes
Time mode Yes
Voltage frequency 50-60 Hz
Solid workpiece weight (max, mounting) 300kg
Heating temperature (max) 250°C
Workpiece bore diameter (mounting) 60 – 600 mm
Operating area height 255mm
Coil diameter 140mm
Voltage 400 – 460 V
Heating temperature steps 1°C
Temperature measurement Magnetic probe K-type
Demagnetisation after heating < 2 A/cm
Error guiding codes Yes
Thermal overload protection Yes
Bearing support arms Yes, foldable
Yoke storage Yes, internal
Main yoke type Sliding yoke, 70 x 70 mm
Forced air cooling No
Housing material Steel
Glass fibre filled polyamide

DIMENSIONS
Operating area width 250mm
Optional yokes for minimal workpiece bore diameter 40mm
Dimensions (W x L x H) 290 x 750 x 440 mm

PERFORMANCE
Heating performance example (bearing, weight, temperature, time) 23172 CC/W33, 220 kg, 110 °C, 20 min