42,52 € (sis. KM)
29 laos (Laki 26)
UCF 208
Kandiline äärikuga pukklaager koos kruvilukustusega, malm, JIS standardid
Need äärikuga kuullaagriüksused vastavad Jaapani tööstusstandarditele (JIS). Need koosnevad siselaagrist, millel on pikendatud sisemine rõngas ja kruviga lukustus, mis sobivad rakendusteks, kus pöörlemissuund on konstantne või vahelduv. Laager on paigaldatud korpusesse, mille saab paigaldada masina seina või raami külge. Kuullaagriüksused võivad taluda mõõdukat kõrvalekallet, kuid tavaliselt ei võimalda need aksiaalset nihet.
Kirjeldus
UCF 208
Square flanged ball bearing unit with set screw locking, cast iron, JIS standards
These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and grub screw locking, suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.
Resist high levels of contamination
Designed for hightemperatures and speeds
Accommodate relatively heavy loads
Cost-effective
DIMENSIONS
Bearing width, total 49.2 mm
Centre distance of bolt holes of pillow type, square and oval flange type housing 102 mm
Housing overall width 35.5 mm
Shaft diameter 40 mm
PERFORMANCE
Basic dynamic load rating 30.7 kN
Basic static load rating 19 kN
Limiting speed 3750 r/min
PROPERTIES
Bore type Cylindrical
Coating Without
Fastening bolt hole type Plain
Flanged housing type Square
Housing type Flanged
Lubricant Grease
Material, bearing Bearing steel
Material, housing Cast iron
Number of bolt holes for fasteners 4
Relubrication hole With
Relubrication nipple With
Retaining feature, inner ring Set screws
Rubber seating ring Without
Sealing type Contact
Sealing, bearing Seal and flinger on both sides
Sealing, unit Without
Seotud tooted
-
Y-LAAGER d-40MM CONCENTRA LUKUSTUS YSP208 SB-2F SKF
- 65,51 € (sis. KM)
- Lisa korvi
-
Y-LAAGER d-40MM YAR 208-2F SKF
- 39,70 € (sis. KM)
- Lisa korvi
-
PUKKLAAGER d-40MM FYJ 40 TF (FYJ508 + YAR208-2F) SKF
- 72,10 € (sis. KM)
- Lisa korvi