TIH 030M/230V
Small induction heater

The small induction heater and is designed for the hot mounting of bearings. This compact heater is ideal for use on workbenches, yet it can be easily carried for on-site applications. Supplied with three yokes and foldable support arms, the heater is capable of heating bearings with a bore diameters of 20 mm or more and with a maximum weight of 40 kg.

Easy and safe to use with automatic temperature control or time controlled heating
Automatic demagnetization reduces risk of bearing contamination
Suitable for non-bearing applications for workpieces weighing up to 20 kg
Automatic temperature hold function to keep the bearing hot after completion of the heating cycle

Tootekood: TIH 030M/230V Kategooria: Hooldustooted Bränd: SKF

Kirjeldus

Kirjeldus

Dimensions

Operating area width	100 mm
Standard yokes for minimal workpiece bore diameter	20, 40, 65 mm
Optional yokes for minimal workpiece bore diameter	30, 60 mm

Performance

Heating performance example (bearing, weight, temperature, time)

23136 CC/W33, 28 kg, 110 °C, 20 min

Properties

Recommended applications	Fans and blowers Compressors Roller conveyors Bearing houses Gear boxes Electrical motors Pump installations Engines
Type	Induction heater, workshop bench
Series	TIH 030m
Heating method	Induction, low frequency
Suitable for mounting	Yes
Suitable for dismounting	No
Solid workpiece weight (max, mounting)	20 kg
Bearing weight (max)	40 kg
Workpiece bore diameter (mounting)	20 – 300 mm
Workpiece outer diameter	32 – 500 mm
Power consumption (max)	2 kVA
Workpiece width (max)	100 mm
Workpiece cross section height (max)	135 mm
Operating area height	135 mm
Coil diameter	95 mm
Main yoke type	Loose yoke
Yoke storage	Yes, internal
Voltage	200-240 V
Voltage frequency	50 / 60 Hz
Current (max)	10 A
Temperature measurement	Magnetic probe K-type
Number of temperature sensors	1
Demagnetisation after heating	Yes
Error guiding codes	Yes
Thermal overload protection	Yes
Bearing support arms	Yes, foldable
Display	7 segment LED display
Forced air cooling	No
Power setting	50%, 100%
Thermometer mode	Yes
Time mode	Yes
Remote control panel (wired)	Yes, with LED display
Heating time control	0 – 3600 s
Heating time steps	6 s
Heating temperature control	20 – 250 °C
Heating temperature steps	1 °C
Housing material	Steel Glass fibre filled polyamide
Colour	Grey Black
Content	Heater, Remote control, Temperature probe (TIH P20), 3 standard yokes (TIH 030-Y7, TIH 030-Y4, TIH 030-Y2), 1 pair of heat resistant gloves (TMBA G11), 1 tube of anti fretting paste (LAGF 3E/0.035) and 1 shucko mains plug