TIH 15/230V
Compact workbench induction heater

This compact induction heater is designed for the hot mounting of bearings. The heater is ideal for use on workbenches, yet it can be easily carried for on-site applications. Supplied with three yokes, the heater is capable of heating bearings with a bore diameters of 20 mm or more and with a maximum weight of 15 kg.

Easy and safe to use with automatic temperature control or time controlled heating
Automatic demagnetization reduces risk of bearing contamination
Suitable for non-bearing applications for workpieces weighing up to 7.5 kg
Automatic temperature hold function to keep the bearing hot after completion of the heating cycle

Tootekood: TIH 15/230V Kategooria: Hooldustooted Bränd: SKF

Kirjeldus

Kirjeldus

Dimensions

Operating area width	90 mm
Standard yokes for minimal workpiece bore diameter	20, 40, 65 mm
Dimensions (W x L x H)	350 x 206 x 240 mm

Performance

Heating performance example (bearing, weight, temperature, time)

6221, 3.7 kg, 110 °C, 5 min

Properties

Recommended applications	Fans and blowers Compressors Roller conveyors Bearing houses Gear boxes Electrical motors Pump installations Engines
Type	Induction heater, workshop bench
Series	TIH 15
Heating method	Induction, low frequency
Suitable for mounting	Yes
Suitable for dismounting	No
Solid workpiece weight (max, mounting)	7.5 kg
Bearing weight (max)	15 kg
Workpiece bore diameter (mounting)	20 – 200 mm
Workpiece outer diameter	32 – 380 mm
Power consumption (max)	1.2 kVA
Workpiece width (max)	90 mm
Workpiece cross section height (max)	85 mm
Operating area height	85 mm
Main yoke type	Loose yoke
Yoke storage	Yes, in removeable tray
Voltage	200-240 V
Voltage frequency	50 / 60 Hz
Current (max)	6 A
Temperature measurement	Magnetic probe K-type
Number of temperature sensors	1
Demagnetisation after heating	Yes
Error guiding codes	Yes
Heating temperature (max)	250 °C
Thermal overload protection	Yes
Bearing support arms	None
Display	7 segment LED display
Forced air cooling	Yes
Power setting	50%, 100%
Thermometer mode	Yes
Time mode	Yes
Remote control panel (wired)	No
Heating time control	0 – 3600 s
Heating time steps	6 s
Heating temperature control	20 – 250 °C
Heating temperature steps	1 °C
Housing material	Steel Glass fibre filled polyamide
Colour	Blue, Dark grey
Content	Heater, Storage tray, Temperature probe (TIH P20), 3 standard yokes (TIH 15-Y2, TIH 15-Y4, TIH 15-Y5), 1x anti-roll support, 1 pair of heat resistant gloves (TMBA G11), 1 tube of anti fretting paste (LAGF 3E/0.035)and 1x power chord with molded EU schucko plug