INDUKTSIOONKUUMUTI TIH 100M/230V SKF

Kirjeldus

TIH100M/230V
SKF Induction Heater TIH 100M (230V version)
The SKF TIH 100M is a medium sized induction heater and is designed for the hot mounting of bearings. This compact heater is ideal for use on workbenches and can easily be transported to on-site applications with the optional heater trolley TIH T1. The heater is supplied with a swivel yoke and two optional yokes for smaller bearings. The TIH 100M can heat small bearings with a bore diameter of just 20 mm and larger bearings with a maximum weight of 120 kg.
Supplied with a swivel yoke and two smaller yokes, located in an integrated storage compartment
Easy and safe to use with automatic temperature control or time controlled heating
Automatic demagnetization reduces risk of bearing contamination
Suitable for non-bearing applications for workpieces weighing up to 60 kg
Automatic temperature hold function to keep the bearing hot after completion of the heating cycle

DIMENSIONS
Dimensions (W x L x H) 230 x 570 x 350 mm
Operating area height 205 mm
Operating area width 155 mm
Workpiece weight (max) 120 kg

PERFORMANCE
Heating performance example (bearing, weight, temperature, time) 23156 CC/W33, 97 kg, 110 °C, 20 min

PROPERTIES
Bearing support arms Yes, foldable
Coil diameter 110 mm
Colour Grey
Black
Cooling fan No
Demagnetisation after heating (according SKF norms) < 2 A/cm
Error guiding codes Yes
Heating temperature (max) 250 °C
Heating temperature control 0 to 250 °C
Heating temperature steps 1 °C
Heating time control 0.1 – 60 minutes min
Heating time steps 0.1 min
Housing material Steel
Glass fibre filled polyamide
Main yoke type Swivel yoke, 56 x 56 mm
Power consumption (max) 3.6 kVA
Power setting 50%
100%
Remote control panel (wired) Yes, with LED display
Temperature measurement Magnetic probe K-type
Thermal overload protection Yes
Thermometer mode Yes
Time mode Yes
Voltage 220.0 – 240.0 V
Voltage frequency 50.0 – 60.0 Hz
Workpiece bore diameter 20 to 400 mm
Yoke storage Yes, internal