PUKKLAAGER d-65MM FYJ65 TF (FYJ513 + YAR 213-2F) SKF

Kirjeldus

FYJ 65 TF
Square flanged ball bearing unit with set screw locking, cast iron housing, JIS
These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.
Resist high levels of contamination
Designed for high temperatures and speeds
Accommodate relatively heavy loads
Cost-effective

DIMENSIONS
Shaft diameter 65 mm
Housing overall width 50 mm
Width, total 72.9 mm
Centre distance between bolt holes 149 mm
Bearing width, total 68.3 mm

PERFORMANCE
Basic dynamic load rating 57.2 kN
Basic static load rating 40 kN
Limiting speed 3000 r/min
Note Limiting speed with shaft tolerance h6

PROPERTIES
Housing type Flanged
Flanged housing type Square
Number of bolt holes for fasteners 4
Fastening bolt hole type Plain
Retaining feature, inner ring Set screws
Bore type Cylindrical
Rubber seating ring Without
Material, housing Cast iron
Material, bearing Bearing steel
Coating Without
Sealing, bearing Seal and flinger on both sides
Sealing type Contact, standard
Sealing, unit Without
Lubricant Grease
Relubrication hole With
Grease fitting With

COMPONENT
Square flanged housing for insert bearings, cast iron, JIS FYJ 513
Insert bearing with set screw locking and extended inner ring YAR 213-2F