TÄPPISLAAGER KUMMIKATETEGA S7004 ACDGA/P4A -SKF-

Kirjeldus

S7004 ACDGA/P4A
Super-precision, high-speed, E design, universally matchable single row angular contact ball bearing with non-contact seals on both sides
These super-precision, high-capacity, single row angular contact ball bearings, with non-contact seals on both sides, accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They are designed to accommodate heavy loads at relatively high speeds under low to moderate operating temperatures. Being universally matchable, they can be used together in arrangements to provide effective load sharing, without the use of shims or similar devices.

Very high running accuracy
Very high load carrying capacity
Universally matchable
Non-contact seals on both sides

DIMENSIONS
Bore diameter 20 mm
Contact angle 25 °
Outside diameter 42 mm
Width 12 mm

PERFORMANCE
Basic dynamic load rating 8.32 kN
Basic static load rating 4.15 kN

PROPERTIES
Coating Without
Contact type Normal contact (two-point contact)
Lubricant Grease
Matched arrangement No
Matched condition (axial clearance/ preload) Measuring load, class A
Material, bearing Bearing steel
Sealing Seal on both sides
Sealing type Non-contact
Tolerance class P4A