KAHEREALINE KUULLAAGER KUMMIKATETEGA 3206 A-2RS1TN9/MT33 -SKF-

Kirjeldus

3206 A-2RS1TN9/MT33
Double row angular contact ball bearing with seals on both sides
Double row angular contact ball bearings, with seals on both sides, correspond to a pair of single row angular contact ball bearings in a back-to-back arrangement, while requiring less axial space. Depending on the sealing execution, they can operate at high speeds and are more suitable than deep groove ball bearings for supporting large axial forces in both directions.
High-speed capability
Accommodate relatively high radial loads, high axial loads in both directions and tilting moments
Suitable where a stiff bearing arrangement is required
Require less axial space than equivalent pair of single row angular contact ball bearings
Integral sealing prolongs bearing service life

DIMENSIONS
Bore diameter 30 mm
Contact angle 30 °
Outside diameter 62 mm
Width 23.8 mm

PERFORMANCE
Basic dynamic load rating 30.5 kN
Basic static load rating 22 kN
Limiting speed 7500 r/min

PROPERTIES
Arrangement of contact angle (double-row bearing) Back-to-back (O)
Axial internal clearance CN
Cage Non-metallic
Coating Without
Contact type Normal contact (two-point contact)
Locating feature, bearing outer ring None
Lubricant Grease
Matched arrangement No
Material, bearing Bearing steel
Number of rows 2
Relubrication feature Without
Ring type One-piece inner and outer rings
Sealing Seal on both sides
Sealing type Contact
Universal matching bearing No